AudioControl HPX Kullanıcı El Kitabı - Sayfa 16

Çapraz Geçiş AudioControl HPX için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. AudioControl HPX 20 sayfaları. In-dash processor and crossover

Sayfayı Yazdır

E. Adjusting The High Definition Expansion

(HDE) Circuitry

The "Expansion" knob controls the intensity or mix rate

of the HDE circuit, which is conveniently located on the

front of your HPX. By turning this knob clockwise it will

increase the amount of the HDE that is mixed into the

signals running inside the HPX. Turning it counterclockwise

will minimize the effect. . . but you probably already guessed

that. The actual setting of the HDE circuit is dependent on

several things; the type of software you are using (compact

disc, tape, MP3, etc.) and the location of the speakers in your

system. However, what will really matter is what you like

the best as there are no autosound police that will kick in

your door and haul you away if you set it improperly.

Owner's Enjoyment Manual

Starting with the knob turned completely counterclock-

wise, start playing some music that you normally listen to

and gradually increase the HDE circuit. What you should

experience is the sound starting to rise and then expand

outside your dash. The dynamics of bass, midrange, and

high should also increase dramatically. At some point, you

may encounter the effect becoming somewhat overpower-

ing, which means you should decrease the HDE slightly.

Now take a listen for a minute or so and then turn off the

HDE effect by pushing in the button labeled "HDE". Pretty

amazing, eh!! Now rush out and tell three of your friends

that they need an HPX for their cars.