Addmaster IJ-6000 Programlama Kılavuzu - Sayfa 5

Yazıcı Addmaster IJ-6000 için çevrimiçi göz atın veya pdf Programlama Kılavuzu indirin. Addmaster IJ-6000 6 sayfaları. Ink-jet transaction printer

Sayfayı Yazdır
Addmaster IJ-6000

5. Downloading Logos

Required Components:
Component
Download Program
Logo Image
Host Platform
Host OS
Downloading Procedure:
Step
Procedure
1.
Prepare PC.
•
Load all files to hard-drive.
•
Open MS-DOS command window.
2.
Prepare Printer.
•
Cable printer to PC's COM1: port.
•
Turn printer off.
3.
Put Printer into Downloading Mode.
•
Turn printer power
•
Set DIP Switch #1 to ON.
•
Turn printer on.
4.
Execute Download Program.
•
C:> dllogo filename
•
Check any prompts given by program.
•
Hit Enter when ready to begin.
5.
Wait for Download completion.
6.
Execute any additional downloading.
•
Step #4 can be repeated if necessary.
•
Firmware can be downloaded at this
time.
•
Fonts can be downloaded at this time.
7.
Exit Downloading Mode.
•
Turn power off.
•
Set DIP Switch #1 to OFF.
8.
Test Download results.
•
Perform printer self-test.
•
Verify version and revision numbers.
Items Required
IJ6ISP.EXE
Image.obj
PC with available COM1:
MS-DOS, Win95/98/NT
Downloading Instructions
Notes
Program file
Image in binary bit image form.
Uses COM1 for RS232 comm.
Notes
When successful, all printer LED
indicators will flash. Don't go further
until flashing LED's are shown.
filename is the file containing the
firmware to be downloaded.
While downloading, all printer LED
indicators are ON continuously.
When downloading is complete and
successful, all printer LED's will
flash.
Unit returns to Downloading mode
for additional downloading.
Page 5