Freedom Easy Kurulum Kılavuzu - Sayfa 15

Su Pompası Freedom Easy için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Freedom Easy 16 sayfaları.

Freedom Easy Pump

7. Remove DCR programming

1. Log into the Configuration Manager of the Commander/RubyCi.

2. Navigate to Forecourt > Fuel > Fuel Config – Pending > Fueling Positions.

See figure 5 on page 15.

Uncheck 'DCR In Dispenser' for each upgraded fueling position and SAVE.

3. Navigate to Tools > Managed Modules > Current Configurations > Host Names -

sitecontroller > Select Module - DCR Driver > DCR Positions – Advanced Settings.

See figure 6 on page 15.

Remove the channel programming for each upgraded DCR Position and SAVE.

4. Initialize Fuel and DCR's.

The Easy Pump should now be operational at each upgraded fueling point.

Once all fueling points have been upgraded to

The Easy Pump, remove the DCR

5. Navigate to Tools > Managed Modules > Current Configurations > Host Names –

sitecontroller > Select Module – DCR Driver > DCR Channel 01 – Advanced

Settings. See figure 7 on page 15.

6. Initialize Fuel and DCR's, including Drivers.

Freedom Easy Pump: Mako

Remove DCR Family type

Remove Port Name

Uncheck Enable and SAVE

driver.