audiodata ArtTwo Kullanıcı Kılavuzu - Sayfa 15

Hoparlör Sistemi audiodata ArtTwo için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. audiodata ArtTwo 17 sayfaları.

Sayfayı Yazdır

5. Connect the right-hand channel's minus high frequency cable (black) to your amp

2's right-hand negative terminal "

' on your right-hand speaker.

6. Proceed as above in the same way with your left-hand channel's loudspeaker.

6.3.2

Vertical bi-amping

1. Remove all cable

loudspeakers

2. Connect the right-hand channel's plus low frequency cable (red) to your amp 2's

right-hand positive terminal "

your right-hand speaker.

3. Connect the right channel's plus high frequency cable (red) to your amp 2's left-

hand plus terminal '

hand speaker.

4. Connect the right-hand channel's minus low frequency cable (black) to your amp

2's right-hand negative terminal "

' on your right-hand speaker.

5. Connect the right channel's minus high frequency cable (black) to your amp 2's

left-hand minus terminal '

right-hand speaker.

6. Proceed as above in the same way with your left-hand channel's loudspeaker.

Cleaning and care



Do not under any circumstances use aggressive cleaning agents, methylated

spirit, thinners, petroleum or similar. Such cleaning agents can damage the

cabinet surface.



Ideally remove dust and minor marks with the micro-fibre cloth included.



Rub off more stubborn marks using a damp cloth. Make sure that no fluid gets

into the loudspeaker.



Subsequently wipe down the surfaces at once with a soft, dry cloth, without

exerting any pressure.

ArtTwo

1st edition, January 2019

" and to the minus high frequency connection

" and to the plus low frequency connection '

' and to the plus high frequency connection '

" and to the minus low frequency connection

–

' and to the minus high frequency connection '

jumpers

from

' on your right-

–

' on your

Page 15

the

' on