Duplo DBM-120 Kurulum Kılavuzu - Sayfa 4

Katlama Makineleri Duplo DBM-120 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Duplo DBM-120 12 sayfaları. Connecting kit model: dc-6000s;dc-8000s 2; dc-10000s
Ayrıca Duplo DBM-120 için: Kurulum Kılavuzu (13 sayfalar)

Sayfayı Yazdır

1. POINTS TO NOTE IN INSTALLATION

Turn off the unit, then unplug its power cord from the AC outlet.

Make sure that the power supply voltage and frequency in your area match the power

requirements indicated on the main name plate of the unit.

Install the equipment in a place where the floor is strong enough to bear the mass of the unit,

which is as follows:

91 kg (200.44 lb)

Requirements for installation space are as follows:

Width × Depth = 1280 × 550 mm (50.39 × 21.65")

Install the equipment in a horizontal and stable position.

Do not install the equipment near heaters or other heat-emitting appliances.

Install and use the equipment in an environment:

– where the temperature range is between 5 and 35°C,

– where the humidity range is between 20 and 85%

RH (no dew condensation),

– which is not subject to direct sunlight,

– which is subject to little or no vibration,

This equipment shall be installed near the socket-outlet where the plug on the power supply

cord is easily accessible.

When you power other appliances from the same AC outlet, make sure that the combined

power consumption does not exceed the power supply capacity.

Connector for connecting cable: DC +5 V Max.

D-PORT connector: DC +6 V Max.

1-1. Before Installing

1-2. Installation Location

1-3. Power Supply

1-4. Output Connector

– where there are no harmful chemicals,

– which is reasonably free from dust,

– which is free from air-borne salt, and

– where the equipment will not be exposed to water.

Connector for connecting cable

D-PORT connectors