Audiodesign PAMX1.24 Kullanıcı El Kitabı - Sayfa 4

Müzik Mikseri Audiodesign PAMX1.24 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Audiodesign PAMX1.24 6 sayfaları.

Sayfayı Yazdır
PREESSIONAL MIXERS
MONO CHANNELS
1.
MIC: XLR balanced microphone input for dynamic and condenser
microphones. By means of the XLR connector, it's possible to feed
condenser microphones. Operate button "PHANTOM ON" to activate this
function (located on the master sectionl) This function is monitored
through the red LED switch on + 48 V located over the LED level
indicators. Use of dynamic microphones with phantom power supply is
INSERT 1
generally not recommended. *
Bal
2.
LINE: balanced or unbalanced line level input, 6,3 mm. Jack
or
Unbal
connector. Important: DON'T use MIC and LINE input signal at the same
time !!!! *
GAIN
3.
GAIN: To adjust channel input level. Should always be completely
turned counter clockwise during connection of any source
MIC: 10
60 dB
LINE:+10
-40 dBu
4.
EQ HIGH: This control adjusts +/- 15 dB with a "shelving" curve
EQ
shape at 12 kHz.
0
HI
12 KHz
5.
EQ MID: This control adjusts +/- 15 dB with a band center at
+15
- 15
2.5 kHz.
0
MID
2.5 KHz
6.
EQ LOW: This control adjusts +/- 15 dB with
+15
- 15
shape at 80
Hz.
0
LOW
7.
This switch activates high-pass filter at 75 Hz - 18dB/Oct
80 Hz
+15
- 15
8.
FX: This control adjusts signal level to send to FX SENDS,
Low Cut
controlled through general adjustment (19). This signal is always "post"
0
FADER
FX
9.
PAN: It adjusts the stereo scene by adjusting the signal levels to
- ¥
+ 15
send to right and left outputs.
PEAK
10.
LEVEL: It adjusts the level of the channel signal.
PAN
Left
Right
11.
PEAK: The red LED indicates CLIPPING mode.
0
Important: in case LED lights up indicating clipping mode, operate by
LEVEL
reducing the TRIM
- ¥
+ 15
* See connection scheme on page 7
Fig 1
PAMX1
Serie
a "shelving" curve
4
PROFESSIONAL MIXERS
BLOCK DIAGRAM
PAMX1
Serie
9