Audiodesign PAMX3.122 Kullanıcı El Kitabı - Sayfa 2
Müzik Mikseri Audiodesign PAMX3.122 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Audiodesign PAMX3.122 8 sayfaları. Professional mixer
PROFESSIONAL MIXER
INTRODUCTION / FEATURES
INSTRUCTION
Welcome you using the this series portable mixer.
These mixers have handsome outline, perfect
functions.
It is easy to schlep or operate. It has two group
outputs and 4 AUX output and it is suitable for a wide
variety of input sources.
There is a effect processor with in the unit, it must
be a ideal equipment you need.
Please read this manual carefully to know all
functions and operations of the products well, in order
to operate the unit at the good condition.
FEATURES
6 or 10 mono input channels and 4 stereo
input channels(2 among 4 stereo input
channels are also used as microphone's
input).
2 auxiliary inputs and 4 auxiliary outputs.
With INSERT function for Mono input channel
Adopt low-noise discrete Mic pre-amplifier on
all microphone inputs, 3-band frequency
equalizer for each input channel.
Built-in +48V phantom power for condenser
microphone.
Signal and peak indicators on each input
channel.
Real two groups output, 60mm slide fader.
4 groups of 12 LED level meter to show the
main out level and the groups out Level.
4 groups of 4 LED level meter to show the 4
AUX out Level.
9-band stereo graphic EQ.
Volume control for headphone out.
Stereo record out and stereo in for tape play.
An effector outside can be linked.
PAGE 2
PAMX3
Serie
NOTICE
1.Check the AC voltage before connecting the
AC plug. Proper grounding is a necessary
practice to prevent electric shock hazards to
the operator, the microphone user, and the
musicians who are wired to this unit.
2.Before switching on the main power, keep
all the output fader all the way down to
prevent damage or excessive noise caused by
bad level adjustment, wrong wiring, defective
cables or bad connection.
3.Always turn on the mixer before the power
amplifier; turn off the mixer after the amplifier.
4.Always turn off the unit before connecting
and disconnecting the unit from the power
source.
5.Never use solvents to clean the unit. Clean
with a soft, dry cloth.
CONTENTS
... ... ... ... ... ... ... ... ...
... ...
Introduction/Features
Precautions...................................................... 3
Mono channel section ... ... ... ... ... ... ... ... ... ... 4
The stereo channel(A) ... ... ... ... ... ... ... ... ... ... 5
The stereo channel(B) ... ... ... ... ... ... ... ... ... ... 9
Master control section... ... ... ... ... ... ... ... ... ... ... 7
Set up MEMO................................................ 10
Effect List... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11
Connection cables..........................................12
System block diagram... ... ... ... ... ... ... ... ... ... ... 13
Application example... ... ... ... ... ... ... ... ... ... ... ... 14
Specifications ................................................15
Inputs
Number
Microphones
Mono LINE IN
Stereo LINE IN A
Stereo LINE IN B
Stereo AUX RET
Stereo PLAY IN
Outputs
Number
Stereo MAIN OUT
Stereo MAIN OUT
SUB OUT
AUX SEND
EFF SEND
Stereo REC OUT
HEADPHONE
Max gain
76dB
70dB
74dB
60dB
... 2
26dB
28dB
28dB
Channel EQ
Main Graphic EQ
Effect Processor
Total harmonic distortion
Frequency response
Max out level
Microphone preamp E.I.N
Type
Power
Power consumption
Weight (Kg)
Dimensions(mm)
PROFESSIONAL MIXER
Input modes
Connector
Impedance
6/10
Balanced
XLR
3-poles TRS
6/10
Balanced
2
Unbalanced
3-poles TRS
2
Unbalanced
2 RCA+2 TRS
1
Unbalanced
2 TRS
1
Unbalanced
2 RCA
Outputs modes
Connector
Impedance
1
Balanced
2 XLR
1
Unbalanced
2 TRS
2
Unbalanced
2 TRS
4
Unbalanced
4 TRS
1
Unbalanced
2-poles TRS
1
Unbalanced
2 RCA
3-poles TRS
1
Stereo out
Signal route
@620ohm Load, balanced
MIC IN------MAIN OUT L/R
MIC IN------L/R,SUB,AUX OUT
@620ohm Load, unbalanced
@620ohm Load
MIC IN------EFF OUT
@10Kohm Load
MIC IN------REC OUT
@620ohm Load, balanced
ST LINE IN------MAIN OUT L/R
@620ohm Load, balanced
AUX RET------MAIN OUT L/R
@620ohm Load, balanced
2 TK IN ------MAIN OUT L/R
HI 12KHz MID 2.5KHz LOW 80Hz max equalizing value +/-15dB
63,125,250,500Hz,1,2,4,8,16KHz max equalizing value +/-12dB
99 effect DSP
<0.1%
@+14dB 20~20000Hz 620ohm load
+1/-2dB
@+4dB 20~20000Hz 620ohm load
+20dB/+26dB<balanced> @0.5%THD 1KHz 620ohm load
-124dB
@ 150ohm , at max gain
PAMX3.82
AC110V;120V;220V; 230V Refer to the label on the back panel
35VA
412x372x86
518x372x86
PAMX3
Serie
SPECIFICATIONS
Input
Rated
Input level
2Kohm
-60dB
47Kohm
-40dB
10Kohm
-10dB
10Kohm
-10dB
10Kohm
-10dB
10Kohm
-10dB
Outputs
Rated
Output level
150ohm
+10dB
75ohm
+4dB
75ohm
+4dB
75ohm
+4dB
75ohm
+4dB
10Kohm
-10dB
3mW @36ohm
100ohm
Conditions
PAMX3.122
45VA
PAGE 15