Audiodesign PAX2 Kullanıcı El Kitabı - Sayfa 3

Konuşmacılar Audiodesign PAX2 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Audiodesign PAX2 4 sayfaları.

Sayfayı Yazdır
Diffusori attivi - Active Speakers
Specification
PAX2 15
Max Power
W
Rated Total Power
W
Low Frequencies Rated Power
W
High Frequencies Rated Power
W
Distortion at Rated Power
<
Max SPL
dB
Frequency response
Hz 55÷20.000 55÷20.000
Horizontal Dispersion angle
°
Vertical Dispersion angle
°
Woofer size
mm
Woofer V/C
mm
Compressor driver V/C
mm
Mic 1 Input
Jack + XLR Jack + XLR
Mic 2 Input
Jack + XLR
USB Input
Line Input
RCA + XLR RCA + XLR
Output
Jack + XLR Jack + XLR
Mic Level Control
Yes (2)
Line Level Control
USB Level Control
Main Level Control
Bass & High Tone control
Dimensions (WxLxH)
cm 46x40x69 43x32x59
Weight
Kg
PAX2 12
PAX2 12 USB PAX2 10 B
450
400
360
320
250
220
200
180
200
180
140
50
40
40
1%
1%
1%
1%
126
124
123
120
55÷20.000
60÷19.000 60÷18.000
90
90
90
90
60
60
60
60
380
320
320
250
75
65
65
50
43
34
34
34
Jack + XLR
Jack + XLR Jack + XLR
---
---
---
con Display
RCA + XLR
RCA + XLR RCA + XLR
Jack + XLR
Jack + XLR
Yes
Yes
Yes
Yes
Yes
Yes
Yes
---
---
Si
---
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
43x32x59
36x28x51 30x25x42
22,5
17,3
18,3
12
6
Serie PAX2
Introduction
PAX2 8
Thank you for purchasing an AudioDesign Live Pro active speaker.
160
Live Pro series are designed to provide extremely high SPL and stunning sonic performance.
100
Main features are:
*
A/B Class separate amplifer for woofer and tweeter for items
*
A/B Class amplifer for items PAX 2 8 and PAX 2 12 USB
1%
*
High SPL
115
90
Precautions:
60
Caution: When using any electric product , precautions should always be taken, including the following:
200
1)
Read carefully all instructions before using the product.
38
2)
To reduce the risk, strict supervision is necessary when the product is used near children.
3)
Don't use the product near to water sources like sinks, kitchens, wet floors, pools,
34
or similar or when raining.
4)
In case hearing losses or buzzing occur, please contact a doctor.
---
5)
This products should be located so that its position does not interfere or reduce its proper ventilation.
6)
This product should be site away from heat sources such as radiators or any other product that
generate heat.
7)
This product should be connected to a power supply line only of the type described on the operating
Jack
instructions. Check always the status of the power cable.
Yes
8)
In case you need to replace the fuse, unplug power supply before replacement. The fuse is located
Yes
over the power socket and needs to be replaced with a fuse of same type and value. If the fuse blows again,
please contact our service. DON'T replace it a second time with a higher value fuse.
---
9)
Unplug power supply when left unused for a long period of time. Don't draw the cable but pull out the
---
plug.
Yes
10)
Make sure that power switch can always be easily reached.
11)
The product needs to be inspected by authorized or qualified personnel in case:
8,6
A- The power cable or plug are damaged
B- Objects or liquids fall inside the product
C- The product has been exposed to rain
D- The product doesn't appear to operate normally or exhibits a marked change in performance.
E- The product has fallen and been damaged.
12)
DON'T operate on the product, except indications on the user's manual . Please refer to authorized
and qualified personnel for any other operation.
13)
Caution: Don't place objects on the product's power cable or place it in a position where it could be
damaged or cause interferences. Improper installation could cause fire risk and/or personal injury.
Service
All Audio Design PRO products have been inspected and tested before leaving the factory and , if properly
used, they will work for many years. However, in case of any problem, please proceed in the following way:
Contact your dealer and inform about the defect you found
In case it won't be possible to solve the problem with the dealer, the product needs to be returned, preferably
in its original packaging or in a proper packing to protect it during the transport. Purchase documents must
be produced too.
Your dealer will arrange the shipment to our service centre.
CE Conformity:
Audiodesign Pro products comply with presently existing directives and standards.
Diffusori attivi - Active Speakers
PAX 2 10 B,
PAX 2 12 and PAX 2 15
3
PAX2
Serie