AEV ProCal SNAP Kullanıcı Kılavuzu - Sayfa 2

Otomobil Aksesuarları AEV ProCal SNAP için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEV ProCal SNAP 9 sayfaları. | jl wrangler & gladiator
Ayrıca AEV ProCal SNAP için: Kullanıcı Kılavuzu (9 sayfalar), Kullanıcı Kılavuzu (16 sayfalar)

Sayfayı Yazdır

1. INSTRUMENT CLUSTER DISPLAY CONTROL BUTTONS

2. INSTRUMENT CLUSTER DISPLAY

3. CRUISE CONTROL BUTTONS

4. STEREO DISPLAY

5. OBDII PORT

6. ENGINE START/STOP BUTTON

OVERVIEW

The AEV ProCal SNAP is a simple, easy to use electronic

recalibration module for Ram Truck. ProCal SNAP has

the ability to recalibrate your vehicle's speedometer to

compensate for non-factory tire sizes, replacement axle gear

ratios and aftermarket or different transfer case gear ratios by

simply plugging into the OBDII diagnostic port and inputting

the numerical values using the stereo's audio equalizer.

PLEASE read these instructions completely before

attempting to use this module. Follow these order of

operations:

1. Install the included AEV ProCal Harness using instructions

from aev-conversions.com.

2. Pair ProCal SNAP to the vehicle.

3. Recalibrate vehicle with ProCal SNAP

NOTE: The ProCal SNAP does not record the changes into

your vehicle's history with FCA/Jeep. Any Warranty or Recall

that requires a re-programming of the modules may erase

the ProCal SNAP settings and require you to use the ProCal

SNAP to adjust your settings again.