Freedom Enterprise MisMatcher01 Rev.D Manuel - Sayfa 7

Müzik Pedalı Freedom Enterprise MisMatcher01 Rev.D için çevrimiçi göz atın veya pdf Manuel indirin. Freedom Enterprise MisMatcher01 Rev.D 19 sayfaları.
Ayrıca Freedom Enterprise MisMatcher01 Rev.D için: Kullanıcı El Kitabı (13 sayfalar)

Sayfayı Yazdır

1. User Interface

Snap the three potentiometers in place along with the DIP switch and

jumpers. Solder them.

Place the LM1881's socket in place. When soldering, jump pin 2 and

3 together with solder. Trim pin 3 off the LM1881. Install the LM1881 only

after soldering the socket.

Place the power switch, as well at the female header on the main

PCB and the male header on the user interface. Secure the two PCBs with

the provided brass screws and standoffs. With these components secured

in place, solder them.

To finish off, remove flux residue left behind and perform a visual

inspection.