Freedom Innovations Plie 2.0 MPC KNEE Kullanım Kılavuzu - Sayfa 13

Kişisel Bakım Ürünleri Freedom Innovations Plie 2.0 MPC KNEE için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Freedom Innovations Plie 2.0 MPC KNEE 20 sayfaları. Prosthetic knee

Sayfayı Yazdır

trochanter

knee

ankle

Figure E

Figure F

Figure G

Figure H

Figure I

Plié Setup Wizard

The Plié Setup Wizard optimizes all the computer settings for Plié® 2.0 MPC Knees only. To access the Plié

Setup Wizard, select the Setting Wizard icon from the Plié Control main window. The Plié Setup Wizard is

illustrated in Figure

The Plié Setup Wizard progresses through four steps to optimize the userʼs computer settings. A dialogue box

provides written instruction for each step. Data is recorded as the user ambulates. The Plié Setup Wizard

analyzes the recorded data to select the optimal Toe Threshold, Swing Transition, and advanced Stability

Parameters.

The Plié Setup Wizard begins with the First Set Up. The First Set Up mode allows alignment adjustments,

calibrates the sensors, and recommends optimal Toe Threshold and Swing Transition values. The Toe Threshold

is set to two-thirds the value of the userʼs average peak moment. The Swing Transition is set so the knee releases

into swing phase immediately prior to the ﬁring of the userʼs hip ﬂexors. A minimum of twenty user steps is

recommended. The suggested Toe Threshold and Swing transition values can be transferred to the knee. This

process should be repeated several times to ensure the optimal values are suggested.

After the First Set Up is complete, the advanced Stability Parameters are enabled. Three data ﬁles are captured

as the user ambulates at his/her slowest, self-selected, and fastest cadences. The data ﬁles are analyzed and

values for each Stability Parameter are suggested. The suggested values can be transferred to the knee.

The Stability Parameters permit stumble recovery to be engaged anytime between the stance-swing phase

transition and peak swing ﬂexion (heel rise). The microprocessor monitors the ten Stability Parameters via the

Plié® 2.0 MPC Knee Instructions for Use (R-720-109 Rev. D), English!