AudioEngine N22 Kurulum Kılavuzu - Sayfa 6
Amplifikatör AudioEngine N22 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. AudioEngine N22 8 sayfaları. Premium desktop audio amplifier
Sayfayı Yazdır
Other Features
Headphone Out - For headphone enthusiasts the N22 includes a high-
performance, low-noise headphone ampli er which works well with all
types of headphones. Even if you don't connect speakers to your N22 the
headphone ampli er will make your iPod or computer sound better
through headphones. Keep in mind that permanent hearing loss may
occur if earbuds or headphones are used at high volume so be sure to set
the volume to a safe level.
Line Out - The N22 includes a variable preamp output so you can connect
a subwoofer, external ampli er, or Audioengine wireless adapter and
control the volume of the line-out from the front panel.
USB Power - The USB power port allows you to charge and power your
iPod, iPhone, Audioengine wireless adapters or any other USB powered
product through the USB connector on the rear panel. Note that this is for
power only, not USB audio or data transfer.
For a complete list of product features and speci cations go to:
www.audioengineusa.com
7
audioengine N22 setup guide
Cleaning
We don't recommend using any solvents or cleaners on Audioengine
ampli ers, cabinets, or speakers. Just wipe down with a soft, dry cloth.
Troubleshooting
Power supply indicator
• Check to see that the AC power cord is securely connected to the power supply and to
is not illuminated
an AC power outlet.
• Check that the AC power outlet is supplying power.
No Sound
• Recheck speaker wire connections from the amplifier to each speaker.
• Verify that the amplifier and your source components are turned on.
• Check that the AC wall outlet is on and working.
• Check that the cable from the power supply is connected to the N22 and the power
supply indicator is lit.
• Check that the volume/power knob on the front panel is turned on and not set to
minimum volume.
• Check that your audio sources (iPod, computer, etc) are turned on and not set to
minimum volume.
• Check that the cables from your audio sources are working and are properly connected.
Sound through
• Recheck all speaker wire connections on the speakers and the amplifier.
one speaker only
• Check that the cables from your audio sources to the amplifier are properly connected.
• If using a computer, verify that the audio output balance setting is centered.
Lack of bass or
• Check the polarity of the speaker wires on the amplifier and both speakers.
poor imaging
• Check the EQ or sound settings on your audio source.
• Decrease the volume of the input audio source and increase the volume of the
Sound Distorted
amplifier.
audioengine N22 setup guide
8