dupol up200-gsm Kullanıcı Kılavuzu - Sayfa 2

İnterkom sistemi dupol up200-gsm için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. dupol up200-gsm 7 sayfaları. Intercom and access control unit operating on mobile gsm network

Sayfayı Yazdır

OPERATION

Visitor mode

When the visitor pushes the call button, the device

initiates a voice call to the configured phone number.

If the called party accepts the call, the communication

establishes for the configured duration. During the

call, the connection cannot be interrupted nor by

making a call to the device, nor by pressing the button

again. The call is ended automatically when the

configured communication time expires, or the called

party can hang up the call at anytime on his/her

phone. The call is ended automatically if the called

party

does

not

answer

A new call is initiated only if the button is pressed

again.

Listen-in mode

The intercom unit can be called from any phone

number. In this case the unit accepts the call without

ringing and the voice connection establishes. The call

can be ended on the caller's phone or by pressing the

call button on the unit.

If the call is initiated from a phone number which

is configured in the unit as gate opener number,

the device will consider the call as a gate opening

call. In this case voice connection is not

established, but the relay output is activated.

To make a "listen-in" call from such phone number,

use the #31# code in front of the number, this hides

the

caller's

#31#0036301234567). The unit will already accept the

call received from unknown phone number.

Controlling the relay output

The RELAY (normally open, NO) relay output can be

controlled as follows, depending on the usage:

 controlling by free call:

on incoming call, after identifying the caller ID, the

unit rejects the call and activates the output

e.g. garage door or barrier opening, for which max

100 user phone numbers can be configured

 controlling by the pushbutton:

the relay activates when the call button is pushed

e.g. possibility to connect an existing door bell

 controlling by the INPUT contact input:

the relay activates on external contact

e.g. garage door opening or closing

 controlling by the phone's:

while in call by pressing 1# of the phone's

numbered keys the relay activates for the

configured time period

ATTENTION:

The RELAY and –OUT+ outputs is activated in

parallel and independently from each other by

both menu items, the Control of outputs and the

Gate control. Please take this into consideration

when planning the usage!

not

available.

phone

number

Controlling the voltage output

The –OUT+ voltage output can be controlled as

follows:

 controlling by the INPUT contact input:

after activating the input, the output activates for

the configured time period

e.g. optional indoor pushbutton for electric lock

control

 controlling by the phone's keys:

while in call by pressing 2# of the phone's

numbered keys the output activates for the

configured time period

e.g. direct control of the electric lock

The voltage output is protected against short circuit

and overcurrent, thereby the output turns off upon

overcurrent and becomes operable again after the

termination of the fault.

Forwarding incoming SMS messages

The unit forwards the SMS messages received on its

SIM card (e.g. balance information in case of a

prepaid card) to the configured phone number. After

forwarding, the received message is deleted from the

SIM card. If there is no phone number configured, the

unit

deletes

forwarding.

(e.g.:

Status LED indications

LED

GSM OK

GSM / SIM

ERROR

CALL IN

PROGRESS

-OUT+

RELAY

the

incoming

messages

Color

Is lit after connecting to the

GSM network and reaching

the sufficient GSM signal.

green

The sufficient signal is: 10

(on 0-31 scale)

Is lit continuously if the device

cannot connect to the GSM

network.

Possible reasons:

- the GSM antenna is faulty or

red

is not connected

- the SIM card is not inserted,

- or the PIN code request is

not disabled,

- or the SIM card is faulty.

Communication in progress.

green

A call or conversation is in

progress.

red

Voltage output activated

red

Relay output activated

UP200-GSM Rev.1.2 08/01/2014

without