AEV ProCal SNAP Kullanıcı Kılavuzu - Sayfa 13

Kontrol Ünitesi AEV ProCal SNAP için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEV ProCal SNAP 16 sayfaları. | jl wrangler & gladiator
Ayrıca AEV ProCal SNAP için: Kullanıcı Kılavuzu (9 sayfalar), Kullanıcı Kılavuzu (9 sayfalar)

Sayfayı Yazdır

VIEW SETTINGS

If you wish to view the current settings, you can do so on the

Instrument Cluster Display. Insert the ProCal SNAP into the

OBDII port. Turn the radio off and use the Instrument Cluster

Display Control Buttons to navigate to AUDIO. The Instrument

Cluster Display will cycle through showing the current setting

for Tire Diameter, Axle Ratio, and 4Low Ratio.

Note: The 4xe model of Wranglers has some unique

characteristics. Please be aware of the following issues:

• Do not program an axle ratio value higher than 4.50

regardless of actual gears. This is a workaround

to inherent conditions in the transmission control

systems

• The 'check engine light'/Malfunction Indicator

Lamp (MIL) may be on after programming. These

errors should clear themselves after time. Or use

SNAP's "Clear Codes" function to remove these error

indications immediately.

NOTICE FOR 4XE OWNERS