Dangguan Taide WBT225 Kullanıcı Kılavuzu - Sayfa 3

Konuşmacılar Dangguan Taide WBT225 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dangguan Taide WBT225 5 sayfaları. & wi-fi

Sayfayı Yazdır

※ Support Amazon voice recognition assistant "Alexa", in addition to listen to music, the user can also use the Echo

takeout, take a taxi, scheduling, weather query and so on。

※ Provide application software base on Android、IOS.PO.

V. System composition:

1. Speaker

2. User manual /warranty card 1

Common function description

VI:

Power-on Status： Long press the Power Button" "for 3 seconds to turn the speaker on and it beeps after 30S

simultaneously with the white indicator Appear. Long press Power Button " "for 3 seconds to turn the speaker off

WiFi connection and use：on the power supply, 30 s, after the prompt speakers WiFi search automatically into the state,

white light flash, connection OK after WiFi instructions of light (white light).Detailed connection reference

MUZO player APP quickly using guide

Amazon voice use：Speakers connected to the Internet firstly, then login WiFi model into the APP Amazon account

(detailed reference APP quickly using guide), after a successful login either through short press

interaction.

Bluetooth Connection: Once switched on, the speaker starts searching for other Bluetooth devices automatically and at

Bluetooth music playback： When connected, the speaker plays music immediately. Press +/-" to select tracks upwards

or downwards. Press and hold +/-"to adjust the volume. While playing music, press

to resume。

Call Pick-up: After connected with the cell phone successfully, the speaker beeps when a call comes in. Press to"

pick it up and to terminate conversation, press"

AUX playback:

Special note: starting up WiFi priority, when inserted into the AUX support after priority mode, now return to your WiFi

should unplug AUX, or restart.。

Intelligent Quick Recharge: Recharge can be performed in the standby mode or power-off situation. Before recharging,

VII: Compatibility

Bluetooth

V2.1+EDR consists of protocols like A2DP, AVRCP and HFP and so on.

the same time, the bluetooth indicator goes on and off. When found a Bluetooth device, the

speaker prompts whether to pair up or not. If selected Yes, it pairs up with the device and

meanwhile, the blue indicator flashes slowly and a beep is also generated by the speaker. If

failed to detect any other Bluetooth device within 5minutes, the speaker will shut itself down.

Turn it back on again to start search. All the paired devices will engage in automatic connection

when the speaker is turned on.

Hints: Please recharge when the battery loses its power considerably or the connection is failed.

Use the supplied audio cable to connect the speaker to another music player such as computer

by plugging one end to the speaker's AUX port and the other end to the music player's audio

port. Plug and play mode shall be supported. Press Mode button to switch into working mode,

hold "Upward" or "Downward" button for 3 seconds to adjust volume. Click "

the voice shall be silent under the condition of AUX and then click "

plug the mini-USB end of the supplied USB cable to the speaker's USB port and the other

end to the USB port of the computer or the USB recharger.

"one more time.

voice

to pause and

" button,

" to open the voice.