Audiofilia AF speakers Kullanıcı El Kitabı - Sayfa 11

Konuşmacılar Audiofilia AF speakers için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Audiofilia AF speakers 16 sayfaları.

Sayfayı Yazdır

Figure 4. This illustration shows how to

connect bare wires to the terminals.

1) Loosen terminal

2) Insert bare end and tighten

terminal

In order to ensure that the speakers are working with the

correct polarity, connect each + terminal on the rear pa-

nel of the amplifier to the respective + (red) terminal on

each speaker. As shown in Figure 5.

Connect the terminals - (black) in the same manner. See

the user manual that came with your amplifier, receiver

and television to confirm connection procedures.

CAUTION!

Do not reverse polarities (+ and - or red and black)

when making connections. Doing so, there will a poor

sound quality and a weaker low range.

STANDARD CONNECTION

Wiring diagram shows polarity connections for one channel

of a stereo or home theater system.

Single channel shown

Amplifier

Red = +

Black = -

No Stripe = -

Stripe = +

Speaker

BI-WIRING CONNECTION

The outer connec tion panel and internal crossover fre -

quenc y division are designed in such a way that the low

frequenc y transducer and midrange / high frequen-

cies can be connec ted to two separate sets of cables.

This is called bi-wiring. Bi-wiring can provide several

sonic advantages such as greater transparenc y of the

sound message, a wider and deeper soundstage and a

considerable flexibility in the power amplifier selec tion.

1) Loosen the terminal and remove

strapping bars.

2) Insert the speaker wire for the

high frequencies into the top set

of terminal and tighten.

3) Insert the speaker wire for low

frequencies into the bottom set of

terminals, and tighten.

BI-AMPING CONNECTION

For bi-amping is intending the connection of two separate

stereo amplifiers, through two sets of cables to the rear

connectors of your speakers.