AUDIOFOCUS ARES8 Kullanıcı Kılavuzu - Sayfa 14

Hoparlör Sistemi AUDIOFOCUS ARES8 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AUDIOFOCUS ARES8 17 sayfaları.

4.4 WIRING

Audiofocus power and signal cables with the appropriate section, length and connectors

for passive and active speaker are recommended

Connect power and signal cables as describe on the technical drawing. Make sure the

preset, volume are right. Check the signal output before application and lifting.

Passive version only have the speakon connector on the back. As it is a two voice

speaker, a 4P speakon connector is needed (1+/1- low; 2+/2-high). Powersoft Armonia

hold all ARES8 presets as in Powersoft X series or Canalli ampliﬁer. One output can drive

up to heigh Serial version of ARES8p and two Parallels version of ARES8p. Use 2.5mm

speaker cable.

AUDIOFOCUS ARES8

Page

sur

USER'S MANUAL