Dupont IntegraTec P Series Manuel - Sayfa 8

Endüstriyel Ekipmanlar Dupont IntegraTec P Series için çevrimiçi göz atın veya pdf Manuel indirin. Dupont IntegraTec P Series 13 sayfaları.

Sayfayı Yazdır
Cautions:
Do not mistaken the
filtrate end and ensure X-ring installed in position.
Request the latest exploded drawing from your DuPont contact:
•
DuPont™ IntegraTec™ XP 55 UXA - End Cap Assembly Type I Technical Drawing
•
DuPont™ IntegraTec™ XP 55 UXA - End Cap Assembly Type II Technical Drawing
•
DuPont™ IntegraTec™ XP 55 UXA - End Cap Assembly Type III Technical Drawing
4.6

Install Feed End Cap

Install X-ring (7) to the feed end, then assemble the bottom end cap A or B(whichever appropriate) to it, install head clamp
pairs (4) , fasten spacer pairs (5), nuts M10 (2), Double-Threaded Bolts (3) , screw nuts tightly at the torque of 30N
Feed Clamp
Orientation.
Cautions:
Do not mistaken the
filtrate end and ensure X-ring installed in position.
Request the latest exploded drawing from your DuPont contact:
•
DuPont™ IntegraTec™ XP 55 UXA - End Cap Assembly Type I Technical Drawing
•
DuPont™ IntegraTec™ XP 55 UXA - End Cap Assembly Type II Technical Drawing
•
DuPont™ IntegraTec™ XP 55 UXA - End Cap Assembly Type III Technical Drawing
Page 8 of 13

Figure 5. Filtrate Clamp Orientation

Figure 6. Feed Clamp Orientation

End Cap Assembly
(Form No 45-D02586-en)
(Form No 45-D02587-en)
(Form No 45-D02588-en)
•
m, refer to
(Form No 45-D02586-en)
(Form No 45-D02587-en)
(Form No 45-D02588-en)
Form No. 45-D04608-en, Rev 0
September 2023