Daniamant Dan W3-1 Kurulum ve Bakım Talimatları Kılavuzu - Sayfa 10
Aydınlatma Ekipmanları Daniamant Dan W3-1 için çevrimiçi göz atın veya pdf Kurulum ve Bakım Talimatları Kılavuzu indirin. Daniamant Dan W3-1 12 sayfaları. Lifejacket light
Sayfayı YazdırInstallation
The Dan W3 is for use on all types of lifejackets.
The Dan W3 is supplied with a fixing clip. The clip is intended to be placed behind
a strip of lifejacket material or reflective tape; the light is secured by pressing it
into the clip.
Light and fixing clip (part no.1950 for grey standard clip) separated to show material path
It is the responsibility of the lifejacket manufacturer to ensure that the light is
attached securely and is in the correct position on the lifejacket to provide
maximum visibility when the wearer is in the water.
Operation
The DAN W3 is switched on automatically when the sensor is immersed in water,
and can be switched off by pressing* the test-on/off button.
The light can also be activated and deactivated manually by pressing the test-
on/off button * for one second.
Test-
Water activation
ON/OFF
contacts
Button
Figure depicts the Water activation contacts and the Manual Test Button