Audiolab 6000A Play Kullanıcı Talimatları - Sayfa 2
Amplifikatör Audiolab 6000A Play için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. Audiolab 6000A Play 12 sayfaları.
Ayrıca Audiolab 6000A Play için: Kullanıcı Talimatları (12 sayfalar), Kullanıcı Talimatları (17 sayfalar)
Sayfayı Yazdır
1 : Important Safety Information
A
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
WARNING: SHOCK HAZARD-DO NOT OPEN
This lightning flash
with
arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of non-insulated "dangerous
voltage"
within
the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock.
Warning: To reduce the risk of electric shock, do
not remove cover (or back) as there are no user-
serviceable parts inside. Refer servicing to qualified
personnel.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance instructions in
the literature accompanying the
appliance.
IMPORTANT SAFETY INFORMATION
Read these instructions.
Keep these instructions.
Heed all
warnings.
Follow all instructions.
Do not use this apparatus near
water.
Clean only with dry cloth
.
Do not block any
ventilation
openings. Install in
accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type
plug.
A polarized plug has two blades
with
one wider than the other. A grounding plug has two
blades and a third grounding prong. The
wide
blade
or the third prong is provided for
your
safety. If the
provided plug does not fit into
your
outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at the plugs, convenience
receptacles, and at the point where they exit from the
apparatus.
otm1·~
Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus.
-
When a cart or rack is used, use caution
when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of
time.
Refer all servicing to qualified service personnel.
Servicing is required
when
the apparatus has been
damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
CAUTION: These servicing instructions are for use by
qualified service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than
that contained in the operating Instructions unless
you
are qualified to do so.
Do not install this equipment in a confined or built-in
space such as a bookcase or similar unit, and keep well
ventilated
in open space. The
ventilation
should not
be impeded by covering the
ventilation
openings with
items such as newspaper, table-cloths, curtains etc.
WARNING: Only use attachments/accessories
specified or provided by the manufacturer (such as the
exclusive supply adapter, battery etc).
WARNING: Please refer to the information on the
exterior panel of the enclosure for electrical and
safety information before installing or operating the
apparatus.
WARNING: The battery (battery or batteries or battery
pack) shall not be exposed to excessive heat such as
sunshine, fire or the
like.
CAUTION: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent
type.
WARNING: For the terminals marked with symbol of"
i
"
may be of sufficient magnitude to constitute a risk
of electric shock. The external wiring connected to the
terminals requires installation by an instructed person
or the used of ready-made leads or cords.
Mains
Supply:
The mains operating
voltage
of
Audiolab 6000 series units is shown on the rear panel.
If this
voltage
does not match the mains
voltage
in
your
area, consult
your
Audiolab dealer about converting
the unit.
The mains supply fuse on the rear panel is accessible
when the IEC mains plug has been removed
.
In the
rare event that it has broken, check for any obvious
cause before replacing the fuse
with
one of the correct
rating and
type.
The fuse
values
are:
220
-
240V (UK, China, etc.) T2.0AL 250V Slow Blow
100 - 120V (USA, Japan, etc.) T 4.0AL 250V Slow Blow