AEV ACUO 908 Series Hızlı Kılavuz - Sayfa 8

Müzik Mikseri AEV ACUO 908 Series için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. AEV ACUO 908 Series 17 sayfaları. On air broadcast console

Dig - Line Module ( channels 5 – 6 )

All controls on the Dig-Line input channel are described below.

AEV Broadcast Srl, via della Tecnica 33 – 40050 Argelato (BO) Italy

ACUO 908 Serie - AEV ON AIR CONSOLE

Web site www.aev.eu

1 – START lamp, it

lights when the channel fader is

active

2 – knob jog ; directly it select the Gain input level

the range is -12 ÷ +12 dB;

in sequence, the following commands:

1th push-buttom Balance adjust (-12 ÷ +12 dB)

2th push-buttom Treble band adjust (-14 ÷ +14 dB)

3th push-buttom Middle band adjust (-14 ÷ +14 dB)

4th push-buttom Bass band adjust (-14 ÷ +14 dB)

5th push-buttom Private Tel active (OFF/ON)

6th push-buttom TB Studio to C.Room active

(OFF/ON)

7th push-buttom PGM bus selection ( Speech/ Music)

8th push-buttom Control Room Mute active

(OFF/ON)

9th push-buttom Mute C.Studio active (OFF/ON)

10th push-buttom Tally active (OFF/ON)

11th push-buttom TB Regia to C. Studio active

(OFF/ON)

3 – DIG to activate the digital AES/EBU source (only

with the channel in STOP)

4 – LINE to activate the line source (only with the

channel in STOP)

5 – PGM Button for routing the channel to the PGM

bus.

6 – UTL Button for routing the channel to the UTL

bus.

7 – AUX Button for routing the channel to the AUX

bus.

8 - Button enabling the preview CUE.

9 - Fader.