Conquip Concrete Coneflow Kibble 1000 Kullanıcı Kılavuzu - Sayfa 6
İnşaat Ekipmanları Conquip Concrete Coneflow Kibble 1000 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Conquip Concrete Coneflow Kibble 1000 11 sayfaları.
Sayfayı Yazdır10. When in position, lower the load until suspended above the discharge point.
Original Working Instructions
Usage Instructions
Continued
11. With the kibble still suspended by the crane, carefully open the gate by
turning the gear or depressing the lever, whichever is relevant for the kibble
type. Only open the gate sufficiently to allow the load to empty.
12. When discharge is complete, close the flow gate fully and secure.
13. With the kibble empty and free of any load, lower it to the ground into the
horizontal position with the bale arm in its lowered, safe position.
14. After use ensure the kibble is thoroughly washed out (see cleaning
instructions below).
15. Once thoroughly cleaned and no longer required, ensure the bale arm is in its
safe, lowered position, release the lifting apparatus' hook and move it clear.
Cleaning Instructions
1. The kibble must be cleaned of all remaining concrete at the end of each work
session, or more frequently if required. There can be no excuse for the unit to
fail because of hard concrete residue.
2. Thorough cleaning can be achieved if the gate control spring is disconnected,
this will allow you to open the gate fully for hosing down. Always take
extreme caution when releasing the gate control. Do not tie the gate control
lever in the open position.
3. Once thoroughly cleaned, the spring must be re-fitted to keep the gate
closed. If you do not, concrete residue may set in the gate blade channels
that will foul its operation.
User Guide - Concrete Coneflow Kibble