Conquip Drag Box Kullanıcı Kılavuzu - Sayfa 2
İnşaat Ekipmanları Conquip Drag Box için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Conquip Drag Box 10 sayfaları.
Sayfayı Yazdır
Product Information
Overview
The Conquip Drag Box is a simple to assemble, edge-supported trench lining
system intended to be installed by an excavator using the excavate and drag
technique.
They are designed to provide local support for trenches as transportable 'shields'
generally in stable or self-supporting ground conditions. The Conquip Drag Box
is normally selected for installing utility pipes in non-urban environments where
increased laying rate is required and ground movements are not critical.
It is generally suitable for trench depths of up to 4.4m and trench widths of up to
3.2m.
All Conquip Drag Boxes are manufactured from Grade S355 British and European
steel. The equipment is manufactured at our fabrication facility in the UK to the
highest manufacturing standards held in the construction industry.
Conquip supply a full range of suitable lifting and extraction chains, edge
protection and trench access accessories.
User Guide - Drag Box
Product Information
Specification
Item
Drag Box Base 5000
Drag Box Extension 5000
Drag Box Base 7000
Drag Box Extension 7000
Weight will be equal to or less than the weight stated depending on your strut configuration.
1
Working
Product Code
Height
Width
TL100-00002
2410mm
600-3000mm
TL100-00003
1810mm
600-3000mm
TL100-00010
2410mm
600-3000mm
TL100-00011
1810mm
600-3000mm
Product Code
TL100-00002
TL100-00003
TL100-00010
TL100-00011
External
Internal
Maximum
Limit State
Length
Length
Weight
Design Load
1
5000mm
4140mm
3,716kg
44kn/m
5000mm
4140mm
2,570kg
44kn/m
7100mm
6150mm
5,236kg
20kn/m
7100mm
6150mm
3,940kg
20kn/m
2
2
2
2
3