Brainworx Fuchs Overdrive Supreme Eklenti Kılavuzu - Sayfa 8

Kayıt Ekipmanları Brainworx Fuchs Overdrive Supreme için çevrimiçi göz atın veya pdf Eklenti Kılavuzu indirin. Brainworx Fuchs Overdrive Supreme 10 sayfaları.

Sayfayı Yazdır

F X R A C K R e c C h a i n

REC CHAINS:

Simply select a speaker and a complete studio setup by browsing through the REC CHAINS

pull-down menu!

In the past two decades Brainworx owner Dirk Ulrich has produced and recorded with

members of DREAM THEATER, TOTO, MICHAEL JACKSON, and with many more famous

and infamous acts. The Brainworx Studio in Germany (www.brainworx- studio.de) is

equipped with one of only nine NEVE VXS 72 consoles ever made, and it also hosts some

of the finest outboard EQs and mic pre-amps available.

Using this impressive setup Dirk has produced a huge variety of customized 'Recording

Chains' for the Fuchs amplifier, which you can apply to your plug-in amp settings. Imagine

a selection of 26 perfectly mic'd and EQ-ed cabinets that you can select and use instantly

with a single mouse click!

Many amp simulations give you some captured impulses of a selection of cabinets and

microphones, then they leave it up to you to EQ and further process these incomplete

setups by mixing different microphone setups, adjusting phase and EQ, and so on. But this

really is not an easy job; it takes years of experience to get it right.

Now all you have to do is select the Recording Chain that sounds best for your amp channel

and setting, adjust the Tone Stack and Gain and you´re good to go! Recallable, reliable,

flexible and fast.

And if for any reason you should not like any of the Recording Chains the plug-in offers, you

may use the very last setting (labeled CABINET BYPASS) and use your own mic'd cabinet.

This setting will give you the sound of a tube amp wired straight into a console, which also

may be a nice effects sound.

Fuchs Overdrive Supreme

+/- SWITCHES (PLUS / MINUS):

Browse through the REC CHAINS by either using the pull-down menu of the REC CHAIN

text box (see above) or just click through the settings using the + and - symbols.

AUTO & BAR selection:

If you are trying to find the best sounding REC CHAIN for your actual song it can be tiring

having to play a few chords, then grabbing the mouse to select the next REC CHAIN,

playing a few notes again, grabbing the mouse again, etc.

For this reason the Fuchs ODS plug-in offers you the AUTO mode:

Just select a pattern (1 Bar, 2 Bars or 4 Bars) and the plug-in will activate the available REC

CHAINS automation, following the actual tempo setting of your DAW. You can now play

uninterrupted and simply listen to the sound of the various REC CHAINS as the plug-in

switches through all of them every single bar, every two bars or every four bars, depending

on your setting.

As soon as you hear the speaker setup you like best just stop AUTO mode by

the AUTO button again and manually select the desired REC CHAIN. Afterwards, just fine-

tweak the TONE STACK and GAIN and there you are.

clicking