Casio DG-10 Oyuncu El Kitabı - Sayfa 8

Müzik Enstrümanı Casio DG-10 için çevrimiçi göz atın veya pdf Oyuncu El Kitabı indirin. Casio DG-10 11 sayfaları. Digital guitar

Sayfayı Yazdır

CHANGING STRINGS

Move e

Press Down

. Slide

Forward

1. As shown in the above diagram,

press down on the sensor cover and

move it toward the neck.

Do not use excessive force on

"ha

any parts in the sensor assembly.

Hex Wrench (Large)

Pull String Through Notch and Hole

_——_--

—

enue

3. Insert the accessory hex

A. Next, pul the ang through

wrench (large) into the head and

the hole in the headpiece and

turn it counter-clockwise to slide

tighten the headpiece screw while

| R |

FIG-1

the headpiece towards the body.

pulling the string taut.

Next, insert the other hex wrench

Using the large hex wrench, move

(small) in the headpiece and

slide the headpiece back into

String J

loosen the screw.

position to adjust string tension.

Avoid tightening the strings

Wrap String

excessively, as this may lead to

neck warps or other damage.

Also, do not use excessive force

FIG-2

on the neck.

Follow the same procedures to

change all 6 strings.

pulling through a few inches of

string, tie the string as shown in

FIG-2. Next, fix the string tight and

cut off any excess.

« a