Abus AZSG10010 Kurulum Talimatları ve Kullanım Kılavuzu - Sayfa 12

Güvenlik Sistemi Abus AZSG10010 için çevrimiçi göz atın veya pdf Kurulum Talimatları ve Kullanım Kılavuzu indirin. Abus AZSG10010 19 sayfaları. Wired outdoor siren

Sayfayı Yazdır

Abus AZSG10010 Kurulum Talimatları ve Kullanım Kılavuzu

Installation

Installing the sounder

Step 1: Select installation location for the sounder

Select an installation location which:

 is inaccessible to intruders and vandals.

 is clearly visible, so that it acts as a strong deterrent.

 can be reached with cabling.

Step 2: Open the sounder's cover

 Open the cover for the lid-fixing screws on the right side (see Fig. 1).

 Remove the fixing screws and open the cover.

Step 3: Mount the sounder on the wall

A pin serves as an anti-removal wall contact to activate the tamper switch on the inside

of the sounder. To fit uneven walls, the length of this pin can be adjusted. To do this,

Note

turn the screw, which is in the pin, either in or out.

 Place the siren on the wall and align it vertically using the integrated spirit level. Mark the

three fixing points.

 Drill the holes in the wall to fit the diameter of the anchor screws. Insert the anchor screws

supplied, in the holes.

 Feed the cable provided in the inner housing through the cable inlet on the reverse side.

 Insert the screws supplied through the sounder's fixing holes. Turn the screws in the screw

anchor. Do not tighten the screws yet.

 Again, vertically align the sounder using the spirit level. Now tighten the screws.

Installation