DANIU QY-EWQ-01 Manuel - Sayfa 10

Termometre DANIU QY-EWQ-01 için çevrimiçi göz atın veya pdf Manuel indirin. DANIU QY-EWQ-01 16 sayfaları. Infrared forehead thermometer

Sayfayı Yazdır

Annex:

Guidance and manufacturer's declaration-electromagnetic emissions

The infrared thermometer is intended for use in the electromagnetic environment specified below. The purchaser or

user of the infrared thermometer should ensure that it is used in this electromagnetic environment:

Launch test

GB4824 RF launch

GB17625.1

Harmonic emission

GB17625.12

Voltage fluctuation / flicker

emission

Guidelines and manufacturer's declaration-electromagnetic immunity

The infrared forehead thermometer is expected to be used in the electromagnetic environment specified below. The

purchaser or user of the infrared forehead thermometer should ensure that it is used in this electromagnetic

Immunity test

Electrostatic Discharge

(ESD)

GB / T 17626.2

Electrical fast transient

burst

GB / T 17626.4

Surge

GB / T 17626.5

Compliance

1 set

functions. Therefore, its RF emissions are very low and may not

Class B

Infrared forehead thermometers are suitable for use in all facilities,

including homes and public low-voltage power supply networks

Not applicable

environment.

IEC 60601 test level

± 6 KV contact discharge

± 8 KV air discharge

± 2 KV to power cord

± 1KV to input / output line

± 1 KV differential

mode voltage

± 2 KV common mode

voltage

Electromagnetic Environment-A Guide

Infrared thermometers use RF energy only for their internal

cause any interference to nearby electronic equipment.

directly connected to homes.

Coincidence

level

± 6 KV contact

discharge

± 8 KV air

discharge

Not applicable

10 / 16

Electromagnetic Environment-A

Guide

The floor should be wood, concrete

or tile, and if the floor is covered

with synthetic material, the relative

humidity should be at least 30%.

Not applicable