CONRAD MEIER COMPACT VAC Kullanıcı El Kitabı - Sayfa 6

Elektrikli Süpürge CONRAD MEIER COMPACT VAC için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. CONRAD MEIER COMPACT VAC 11 sayfaları. With multicyclonic technology

Sayfayı Yazdır

Setting Up

Before assembly, ensure you have all components by checking 'What's
included?'
DO NOT plug in the Vacuum before assembly.
Connecting the Hose
Insert the Hose into the Hose Inlet until it clicks into place (Fig . 1) .
To remove the Hose, press the Hose Release Button .
Telescopic Tube and Vacuum Head
Insert the leading end of the Hose (1) into the top of the Telescopic Tube (Fig . 2) .
Then insert the leading end of the Telescopic Tube (2) into the Vacuum Head (Fig . 2) .
1
2
(Fig . 2)
Page 8
(Fig . 1)
Conrad Meier
Compact Vac With Multicyclonic Technology
™
Using your Conrad Meier MultiCyclone Compact Canister
Vacuum Cleaner
Pull the Power Cord out of the Vacuum to the desired length and plug into a
power outlet .
Warning!
The yellow band on the Power Cord indicates its maximum length. Never
pull the Power Cord out past the red band as damage may result .
Press the Power Button with your hand or foot to turn the Vacuum on and start
to vacuum .
NOTE: When vacuuming, tow the Vacuum behind you on its wheels.
Suction Control
Use the Air Release Switch on the Hose to increase or decrease suction (Fig . 3) .
Removing and emptying the Dust Cup
• Empty the Dust Cup regularly when dirt reaches
the MAX line (Fig . 4) .
• Turn off the Vacuum .
• Remove the Dust Cup from the Vacuum by
pushing the Dust Cup Release Button and lifting
the Dust Cup off the Vacuum .
• Hold the Dust Cup over a rubbish bin (Fig . 4) .
• Press the Release Button to open the bottom
door of the Dust Cup . Dirt will automatically fall
out .
Conrad Meier
Compact Vac With Multicyclonic Technology
™
(Fig . 3) .
MAX
(Fig . 4) .
Page 9