Audion Silver Night Stereo Integrated 300B Mk2 Kullanıcı Kılavuzu - Sayfa 7

Amplifikatör Audion Silver Night Stereo Integrated 300B Mk2 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Audion Silver Night Stereo Integrated 300B Mk2 9 sayfaları. Power amplifiers

Sayfayı Yazdır

The ground lift switch is used to effectively reduce a ground

feedback loop and hence noise from some installations.

Finally connect the power cord to a mains electricity supply.

Before proceeding – Are all the connections fitted correctly and

securely tightened?

Finally Check again – make sure everything is correct.

Using your Audion

Congratulations you are now ready to switch your Audion on. But

first we recommend turning the volume control on the front panel

anti-clockwise to zero. On the rear panel locate the on/off button.

Push the button downwards to position 1, this has now turned your

Audion on. You will notice if everything has been installed correctly

that your valves/tubes are starting to glow, your Audion is now

"Warming up". We recommend that an initial few minutes is

allowed for the warm up process to take place. A valve/tube will

change its audio characteristics slightly once it has reached its

nominal operating temperature.

Select your sound source, CD, record, etc. and play. Once your

source has started playing adjust the volume control to your

required level.

On the Integrated model, the five switches correspond to the five

inputs on the rear and can be switched in and out accordingly.

MUTE

Audion Silver Night Integrated Amplifier Front Panel

Revision 1.02 Silver Night

- 7 -

Audion International