Danley DTS20 Kullanıcı El Kitabı - Sayfa 2

Subwoofer Danley DTS20 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Danley DTS20 8 sayfaları.

Sayfayı Yazdır

The instructions on this page apply to Danley powered units.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Clean only with dry cloth.

6. Do not block any ventilation openings. Install in

accordance with the manufacturer's instructions.

7. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers)

that produce heat.

8. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the

third prong is provided for your safety. If the provided plug

does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

9. The power plug at the wall must remain accessible to be

able to disconnect power from the apparatus.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Unplug this apparatus during lightning storms or when

unused for long periods of time.

13. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged

in any way, such as power-supply cord or plug is damaged,

liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

14. This apparatus shall not be exposed to dripping or

splashing, and no object filled with liquid, such as vases,

shall be placed on the apparatus.

15. This apparatus has been designed with Class-I

construction and must be connected to a mains socket outlet

with a protective grounding connection (the third grounding

prong).

19. If the loudspeaker is exposed to changes in temperature

and humidity, internal condensation may develop. If

powered up with such condensation, electronic failure could

result. When exposed to environmental changes, allow the

loudspeaker at least 30 minutes to acclimate to a new

temperature before connecting to the ac mains and operating.

Page | 2

DANLEY OWNER'S MANUAL

20. Danley Sound Labs loudspeakers can produce sound

levels capable of causing permanent hearing damage from

prolonged exposure. The higher the sound level, the less

exposure needed to cause such damage. Avoid prolonged

exposure to the high sound levels from the loudspeaker.

WARNING: TO REDUCE THE RISK OF FIRE OR

ELECTRIC

SHOCK,

APPLIANCE TO RAIN OR MOISTURE. DO NOT

EXPOSE THE APPARATUS TO DRIPPING OR

SPLASHING AND DO NOT PLACE OBJECTS FILLED

WITH LIQUIDS, SUCH AS DRINKS, ON THE

APPARATUS.

CAUTION: This product is energized as long as it is

connected to the AC mains supply.

CAUTION: Allow at least six inches of free space all around

the amplifier heat sink for sufficient ventilation.

www.danleysoundlabs.com

NOT

EXPOSE

THIS