Caslon Maxit 927 Kullanım ve Bakım Kılavuzu - Sayfa 4
Laminatör Caslon Maxit 927 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Caslon Maxit 927 13 sayfaları.
Ayrıca Caslon Maxit 927 için: Kullanım ve Bakım Kılavuzu (12 sayfalar)
Sayfayı YazdırSafety Information
Read and understand all instructions in this manual before attempting installation, operation or
general maintenance of the Maxit.
Use only a grounded electrical outlet when connecting the Maxit to a power source. If
you are unsure, check with a qualified electrician – see "Important information before
you start" below.
Observe all warnings and instructions marked on the Maxit.
Unplug the Maxit from wall outlets before cleaning or maintenance.
Do not install or operate the Maxit near water or whilst you are wet.
Make sure the Maxit is installed on a secure and stable surface.
Make sure the power cord does not obstruct walkways near the Maxit.
Keep long hair and jewellery clear whilst operating the Maxit.
Never operate the Maxit with any guarding removed.
Always disconnect the power to the Maxit whilst not in use.
If you are in any doubt about the operation of the Maxit, please call your local service
agent.
Important information before you start
A power surge protector should be used with the Maxit to protect the electronics. Electronics
that are damaged due to power surges are not covered under the standard warranty.
The user is solely responsible to assure that the Maxit is not connected to the wrong voltage.
Damage caused by incorrect voltage hook-up is not covered under the standard warranty.
We recommend that the Maxit box and packing materials be kept. While service parts are
available from your dealer and can typically be easily replaced in the field, it may be necessary
to return the Maxit to the factory for complex service. The Maxit box and packing material have
been designed to protect the machine from normal handling during transportation.
Use only Maxit adhesive in this coater
Page 3