Belco TAR RIVER PTS-100 Operatör El Kitabı - Sayfa 4
Serpme Belco TAR RIVER PTS-100 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Belco TAR RIVER PTS-100 16 sayfaları. Ground driven spreader
Sayfayı Yazdır
SAFETY DECAL CARE
Replace safety signs that are missing or have become illegible.
Replaced parts that displayed a safety sign should also display the current sign.
Safety signs are available from your Distributor or Dealer Parts Department or the factory.
How to Install Safety Signs:
Be sure that the installation area is clean and dry.
Decide on the exact position before you remove the backing paper.
Remove the smallest portion of the split backing paper.
Align the decal over the specified area and carefully press the small portion with the exposed stick back-
ing in place.
Slowly peel back the remaining paper and carefully smooth the remaining portion of the decal in place.
Small air pockets can be pierced with a pin and smoothed out using the piece of decal backing paper.
BEFORE OPERATION
Carefully study and understand this manual.
Do not wear loose-fitting clothing, which may catch in moving parts.
Always wear protective clothing and substantial shoes.
Keep wheel lug nuts or bolts tightened to specified torque.
Assure that agricultural implement tires are inflated evenly.
Give the unit a visual inspection for any loose bolts, worn parts or cracked welds, and make necessary
repairs. Follow the maintenance safety instructions included in this manual.
Be sure that there are no tools lying on or in the equipment.
Do not use the unit until you are sure that the area is clear, especially children and animals.
Don't hurry the learning process or take the unit for granted. Ease into it and become familiar with
your new equipment.
Practice operation of your equipment and its attachments. Completely familiarize yourself and other
operators with its operation before using.
Use a tractor equipped with a Roll Over Protective System (ROPS) and fasten your seat belt prior to
starting the engine.
The manufacturer does not recommend usage of tractor with ROPS removed.
Move tractor wheels to the widest recommended settings to increase stability.
Securely attach to towing unit. Use a high strength, appropriately sized hitch pin with a mechanical
retainer and attach safety chain.
Do not allow anyone to stand between the tongue or hitch and the towing vehicle when backing up to the
equipment.
Children should not be allowed on the product.
Clear the area of small children and bystanders before moving the feeder.
If using a towing unit, securely attach feeder by using a hardened 3/4" pin, a metal retainer, and safety
chains if required. Shift towing unit to a lower gear before going down steep downgrades, thus using
the engine as a retarding force. Keep towing vehicle in gear at all times. Slow down for corners and
rough terrain.
Make sure you are in compliance with all local and state regulations regarding transporting equipment