Audiophonics DAW-S250NC Kullanıcı Kılavuzu - Sayfa 12

Amplifikatör Audiophonics DAW-S250NC için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Audiophonics DAW-S250NC 14 sayfaları.

Sayfayı Yazdır
Audiophonics DAW-S250NC Kullanıcı Kılavuzu
15
16
18
19
20
22
23
24
26

Operation of the device

Switching on the device
First, connect the amplifier's power supply connector (13) to a power outlet using the supplied power cable. Press the power button (14). The LED on the ON/OFF
button (1) will light up red. Press the ON/OFF button (1) on the unit or the ON/OFF button (15) on the remote control. The amplifier is now switched on.
Volume control
The DAW-250NC's volume attenuation can be adjusted over a range of -60dB to 0dB in 0.5dB steps. To increase the volume, turn the volume knob (5) clockwise or
press the Volume + button (25) on the remote control. To decrease the volume, turn the volume knob (5) counterclockwise or press the Volume - button (24) on the
remote control. The display (4) shows the current volume level.
Enable / Disable the mute mode
The mute mode allows you to instantly mute the audio output. To enable the mute mode, press the Mute button (26) on the remote control. « MUTE » appears on
the display (4). To disable the mute mode, press the Mute button (26) on the remote control again, or change the volume level using the volume control (5)�
Input selection
To select an input, press the Input button on the device (2) or the Input button on the remote control (16). The inputs change in the following cycle : USB > Coaxial
> Optical > Bluetooth > WiFi > USB. The display (4) shows the active input.
Bluetooth pairing
To pair a device (smartphone, tablet, etc.) to the DAW-S250NC via Bluetooth, first select the Bluetooth input using the Input button on the device (2) or the
Input button on the remote control (16). On your pairing device (smartphone, tablet, etc.), go to the Bluetooth pairing interface and select the device labeled
«Audiophonics». Your source device and amplifier are now paired.
Remote control
17
INPUT
SELECT
21
25
VOL-
VOL+
MUTE
#
Description
15
ON/OFF button
16
Input selection button
17
Menu button
18
Up navigation
19
Validation button
20
NA
21
NA
22
Bottom navigation
23
NA
24
Volume -
25
Volume +
26
Mute button
11
EN