audiophony WA-4x3 Kullanıcı Kılavuzu - Sayfa 5
Amplifikatör audiophony WA-4x3 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. audiophony WA-4x3 13 sayfaları. 4-channel amplifier - 4x300w at 4 ohms
Sayfayı YazdırWA-4x3 - 4 x 300 Watts Amplifier
Connect here the incoming signal via male XLR socket.
[9] - LIMITER Selector
Allow you to limit the incoming signals level.
[10] - XLR Bus inputs
[11] - Channel 2 BUS or LINE mode selector
Allows you to switch between two modes:
- Line: This channel is independent
- Bus: Channel 4 signal is amplified by the 4 output channels.
Volume settings via the attenuators.
[12] - Bridge 2 mode selector
Allows you to select the amplification mode: bridge or normal.
[13] - Channel 1 BUS or LINE mode selector
[14] - Circuit-breaker
[15] - Channel 2 XLR inputs
Connect here the incoming signal via male XLR socket.
[16] - Channel 2 banana output
[17] - BRIDGE 1 banana output
[18] - Channel 1 banana output
[19] - Channel 1 and Bridge XLR inputs
Connect here the incoming signal via male XLR socket.
[20] - Power input socket
Please make sure the voltage delivered by the electrical outlet is compatible with your device, then
connect the supplied power cord.
ENGLISH
Page 5