audiophony ZONEAMP4120 Kullanıcı Kılavuzu - Sayfa 7

Amplifikatör audiophony ZONEAMP4120 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. audiophony ZONEAMP4120 13 sayfaları. 120w/100v rackable multizone mixer/amplifier with 8 inputs and 4 outputs

Sayfayı Yazdır
ZONEAMP4120 - 120W/100V Rackable multizone Mixer/Amplifier with 8 inputs and 4 outputs

REAR PANEL

2
1
10
9
1
Power input
Connect here the supplied IEC power cord, then
connect the other end to an electrical outlet after having
checked the voltage.
2
REMOTE MIC
Allows you to connect the MIC-DESK4 announcer.
Thanks to your MIC-DESK4, you can individually select
each zone for public announcements.
3
REMOTE INPUT
Allows you to connect the remote wall-controllerWP-1.
Your WP-1 allows you to send a microphone or line
signal to each zone and adjust the level of each zone.
4
CHANNEL 1 to 8 knobs
Allows you to adjust input soundlevels.
They have a range of -50 dB to -6 dB for microphones
and of -30 dB to +14 dB for line levels.
5
PRIORITY switch
When activated, allows you to give priority to channel 1
, it acts like a talk-over and interrupt the signals of
non-priority channels.
6
PHANTOM switches
Allows you to add a +15V DC phantom power supply
to microphone channels 2 to 4 in order to connect
electrostatic microphones.
Channel 1 phantom power supply is independent and
+24V DC.
7
Inputs
Inputs are as follows:
-Inputs 1 to 4: Micros via balanced XLR plugs line mono
via Jack TRS (balanced).
-Inputs 5 to 8: Mono lines via RCA plugs and Mono
lines via unbalanced Jack.
3
4
8
8
LINE Outputs
Connect here an amplifier in order to power up speakers.
The signal level sent to these outputs can be adjusted
via the front panel and LEVEL knobs of zones OUTPUT
1 to 4.
9
SPEAKER 1 to 4 outputs
Connect here your speaers or recessed speakers.
Please refer to chapter 7 for more information.
10
MUTE ALL socket
This 2-pin socket allows you to connect a switch to
mute all channels at once.
English
5
4
6
7
Page 7