audiophony Atom15A Kullanıcı Kılavuzu - Sayfa 4

Konuşmacılar audiophony Atom15A için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. audiophony Atom15A 12 sayfaları.

ATOM series - 2 ways 10/12/15" powered full range speaker and 15/18" powered subwoofer with DSP

4 - Module d'amplification des enceintes

Power input socket

Allows you to connect the speaker to an electrical outlet.

Use the supplied IEC cord, and make sure the voltage

delivered by the outlet is in adequation with the value

indicated by the voltage selector before turning on the

built-in amplifier.

Power switch

Allows you to turn ON/OFF the built-in amplifier.

XLR LINE OUT socket

Allows you to retrieve the sum of each incoming signal

and transmit it to another amplified speaker, mixing

desk, or speaker/amplifier system.

MIC/LINE input via COMBO plug

The COMBO plug allows you to connect either a male

XLR plug or male stereo/mono Jack plug.

Page 4

LINE/MIC Selector

Allows you to adapt the impedance of the socket to the

type of signal detected.

When pressed, the entry level is adapted to a

microphone, when released it is adapted to a line level

signal.

Integrated DSP diplay

Displays the settings of the built-in DSP.

The different settings of the DSP will be explained in

paragraph 5.

DSP settings button

Press this button to access the available settings or to

enter the different submenus.

Then turn this knob to scroll through the values of each

sub-menu.

Press again to confirm your settings.