audiophony H11175 Kullanıcı Kılavuzu - Sayfa 7
Hoparlör Sistemi audiophony H11175 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. audiophony H11175 10 sayfaları. Compact active curve array system with mixer, вт and dsp
Sayfayı Yazdır
MOJO2200curve - Compact active curve array system with mixer, BT and DSP
Note: If you press and hold the multi-function key (4) for more than 5 seconds, you lock the menu.
The display then shows
To unlock the menu, press and hold the multi-function button again for more than 5 seconds.
4.3 - TWS mode operation :
The Bluetooth TWS mode allows you to connect two MOJO2200CURVE together in Bluetooth to broadcast in
stereo from a single Bluetooth source (phone, tablet, ... etc).
Switching on the TWS mode :
1 - If you have already paired one of the two MOJO2200CURVE, go to the Bluetooth management of your source
and deactivate Bluetooth.
2 - On both MOJO2200CRVE, activate the TWS mode. A "Left Channel" or "Right Channel" voice message will be
emitted to confirm that the TWS mode is active.
3 - Reactivate Bluetooth on your source and pair the device named MOJO2200CURVE.
4 - You can now play your music in stereo on two MOJO2200CURVE.
Note: The TWS mode only works with a Bluetooth source.
OFF : The display never dim
ON : After 8 seconds the display turns off.
Allow to load recorded preset
Allow to record a preset
Erase the recorded preset
Adjust the brightness of the display from 0 to 10
Adjust the contrast of the display from 0 to 10
Reset all the adjustments. Default factory setting is MUSIC mode.
Firmware version information
Exit of the menu
English
Page 7