audiophony DIGITAL-3 Kullanıcı Kılavuzu - Sayfa 5
Müzik Mikseri audiophony DIGITAL-3 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. audiophony DIGITAL-3 8 sayfaları. 3-channel mixer with 1 mic and 2 usb ports
Sayfayı YazdırDIGITAL-3 3-channel mixer with 1 mic and 2 USB ports
1 - Mic Level control knob
Adjusts the microphone volume.
2 - HI control knob (mic channel)
Adjusts the trebles volume of your microphone (increases or decreases by 10dB).
3 - LOW control knob (mic channel)
Adjusts the low frequencies volume of your microphone (increases or decreases by 10dB).
4 - MIC On / Off / Talk Switch
ON/OFF / Talkover selector (music will be dimmed to -14dB).
5 - CH2 Switch
Audio / Phono / Line selector.
6 - GAIN control knob (channels 1, 2 and 3)
Gain control settings.
7 - HI control knob (channels 1, 2 and 3)
Adjusts high frequencies volume of channel 1, 2 and 3.From -26 dB à + 9 dB.
8 - MID control knob (channels 1, 2 and 3)
Adjusts mid frequencies volume of channels 1, 2 and 3.From -26 dB à + 9 dB.
9 - LOW control knob (channels 1, 2 and 3)
Adjusts low frequencies volume of channels 1, 2 and 3.From -26 dB à + 9 dB.
10 - Faders (channels 1, 2 and 3)
Post-equalization volume settings of channels 1, 2 and 3..
11 - Crossfader
Allows you to combine channels 1 and 3 signals. It is regarded as wearing part and can be easily
dismantled and replaced.
12 - CUE LEVEL (headphones volume) control knob
Allows you to adjust headphones volume. These settings are affected by the CUE MIXER knob.
13 - CUE MIXER control knob
Allows you to precisely combine the CUE and Master channels: this is perfect for mixing.
When on the left, you will hear the CUE, while positioning it on the right will allow you to hear the
Master output.
14 - CUE 1, 2 and 3 buttons
Allow you to select a CUE channel. The LED indicater lights up when a CUE channel is activated.
The CUE mode allows you to send audio signal from a specific channel to your headphones. Its
output can be adjusted via the CUE LEVEL (12) button. Please make sure the volume is at its
lowest before plugging your headphones. The CUE MIXER button must be on the left to hear the
CUE channel only.
15 - MASTER control knob
Master volume output control.
16 - LED VU meter
Indicates the Master output sound levels.
17 - CH1 and CH3 switches
Audio source selector: Phono, USB or Line.
ENGLISH
Page 5