DanPure LUXE 75 Kullanıcı Kılavuzu - Sayfa 4

Su Sebili DanPure LUXE 75 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DanPure LUXE 75 8 sayfaları.

Sayfayı Yazdır
2. Product brief introduction
2.1 Product configuration and technical parameters
Model
Description
Mode type
Power
Rated power
Heating capacity
Cooling capacity
Applicable water quality
Applicable water pressure
Ambient temperature
Package size
2 .2 Structure
1.Display & Buttons
This area shows a general working status of the machine and buttons for different functions.
2.Hot water tap
If you want to get hot water, you can put cup or glass under it, and push the red lever, while
at the same time, push the button above
3.Normal water tap
If you want to get normal water, you can put cup or glass under it, and push the yellow lever.
4.Cold water tap
If you want to get cold water, you can put cup or glass under it, and push the blue lever.
5.Drip tray
This is a tray for holding a little waste water. You can take it out when it is full.
6.Lower panel
The lower panel is the cover for filters, can be disassembled for filters change. Please refer
to the instructions for filters replacement.
8.Cooling power switch
Switch on to start the water cooling.
9.Heating power switch heating.
Switch on to start the water heating
10.Condenser
This is part of cooling elements connect to compressor
11.Cold water outlet
It is used the first time you use the machine or long time without using it. You can screw out
the cap to release the water from the cold tank to clean the tank .
12.Hot water outlet
It is used the first time you use the machine or long time without using it. You can screw out
the cap to release the water from the hot tank to clean the tank.
13.Water inlet
It is connected with a PE tube to water tap, water then will come from your tap water into the
machine
14.Drain water outlet
There will be some drain water coming out from this outlet when machine operates
DANPURE LUXE 75
Hot and cold water dispenser
RO system
220-240V
/
50Hz
640W
6L/H ( 90
'
C
)
2L/H (
10'
C
)
Municipal tap water
0.1-0.6 Mpa
5-38
'
C
320x360x933 mm