Addonics Technologies NAS25HDU2 Kullanıcı Kılavuzu - Sayfa 2
Depolama Addonics Technologies NAS25HDU2 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Addonics Technologies NAS25HDU2 13 sayfaları. Mini nas
Ayrıca Addonics Technologies NAS25HDU2 için: Kullanıcı Kılavuzu (8 sayfalar), Hızlı Kurulum Kılavuzu (4 sayfalar)
Sayfayı Yazdır
Network Environment
There are 3 different setup conditions you can choose:
A. Setup mini NAS as a DHCP Client:
If the mini NAS is connected to a LAN network with an active DHCP server,
it will obtain an IP address from DHCP server automatically.
B. Setup mini NAS as DHCP Server:
If your LAN network does not have an active DHCP server, the mini NAS will
immediately act as DHCP server and assign itself an IP address for
installation.
C. Setup mini NAS in Static IP environment:
You first need to configure the IP address for mini NAS to operate in the
static IP environment. For Configuring details, please refer to "LAN Config"
setup page.
2.0
Mini NAS Hardware Installation
3.
Connect LAN cable to uplink port to LAN switch and/or router.
4.
Connect 5V power adapter then power up the mini NAS.
On / Off Power
Switch
5V Power Jack
1.
To open the mini NAS, remove
the 2 screws located at the
bottom part of the enclosure.
2.
Insert the SATA drive into the
SATA connector and secure the
drive using the screws provided.
Factory Reset
Button
USB port for
print server
Uplink port to
Network Link /
router
Access LEDs
Mini NAS connected directly to a computer's NIC card
If you connect the mini NAS to a computer directly, the will act as a DHCP
server, assigning itself an IP address automatically and will also assign an IP
address to the computer's network card. This configuration will not enable you to
see the drive on the network.
Mini NAS connected to a Router or Switch
When the mini NAS is connected to a LAN network with an active DHCP server,
it will obtain an IP address from DHCP server automatically. Or if your LAN
network does not have an active DHCP server, mini NAS will immediately act as
DHCP server and assign itself an IP address for installation
Search mini NAS by SDisk Utility
3.0
1.
Browse the CD enclosed in the product package. Copy and paste "SDisk
Utility" in to your computer then double click the icon to start search.
Note:
"SDisk utility" was written with JAVA script, please make sure your
computer has installed JAVA before, if not please install the JAVA JRE
from the CD drive.
2.
When mini NAS has been found, click "Connect" to enter web GUI utility.
Open mini NAS web GUI by using web browser.
1.
Open web browser and type default host name "storage" in the
search bar.
2.
Default login is "admin" for both User name and password. Click
"OK" to enter configurations.