audiophony Octave Kullanıcı Kılavuzu - Sayfa 9

Subwoofer audiophony Octave için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. audiophony Octave 12 sayfaları. Active subwoofer and satellites

Sayfayı Yazdır

OCTAVE - Active subwoofer and satellites

5 - Setting up the satellites

5.1 - Using speaker stands

The OCTAVE and SATOCT16 satellites feature 35 mm baseplates to mount them on a compatible

speaker stand, such as the CAB-200 from AUDIOPHONY, as described on the drawing opposite .

Please respect the following safety precautions when using speaker

stands:

WARNING

- If the speaker stands are in a crowded area, make sure to prevent the

audience from accessing them.

- When mounting the stands, make sure to spread the tripod as much as

possible to stabilise the stand.

- Please respect carefully the manufacturer's instructions.

- Please make sure to install your stands on a flat, even surface.

- Tighten the clamping knobs properly before turning the speakers on

5.2 - Using a wall hanging system

The COMPACT satellites are equipped with M6 inserts allowing you to

hang them to walls, such as the SUPOCT, SUPMUR2 or SUP-SAT from AUDIOPHONY

Please find below more details about these inserts.

Note :

- No matter which hanging system you choose, you must use a double safety cable to

secure the fixation.

- Please make sure the type of support chosen is compatible with the weight of the

satellite.

WARNING

- Please check the type of fixation is adapted to your wall.

- When using speakers stands outdoors, please make sure

the stands are secured, even perhaps guyed, in order to

prevent any risk of fall.

- Do not stack up several satellites onto the same

accessory as speaker stands are usually designed for a

single speaker.

Ø 6mm

60mm

SUPOCT

ENGLISH

SUPMUR2

SUP-SAT

Page 9