audiophony SRSUB15A Kullanıcı Kılavuzu - Sayfa 5
Subwoofer audiophony SRSUB15A için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. audiophony SRSUB15A 8 sayfaları. 15" 500w self-powered subwoofer
Sayfayı Yazdır
SRSUB15A - 15" 500W self-powered subwoofer
1
INPUT L and INPUT R
Line-level left and right inputs via COMBO sockets.
COMBO sockets allow you to either connect a mono/
stereo male XLR or male Jack plug.
These are balanced inputs.
More details about connections are available further in
this guide.
2
THRU L and THRU R outputs
These 3-pin XLR outputs allow you to send the incoming
signal to amplified speakers (for instance).
3
LEVEL control knob
Allows you to adjust the sound output of your subwoofer.
Although you can turn it at full volume, we
recommend, to guarantee an optimal sound quality,
not to exceed 0 dB signals level on your mixing desk.
These settings do not affect THRU L and THRU R
outputs.
4
Indicator LEDs
• Power: Lights up upon activation of your subwoofer.
• Signal: Lights up upon detection of an incoming
signal.
• Clip: Lights up when incoming signal levels exceed
0dB. Please make sure this LED only lights
up briefly to guarantee an optimal sound
quality.
5
PHASE
Phase inverter switch.
The phase inversion is especially useful when using
several subwoofers simultaneously.
Depending on the position of your subwoofers, low
frequencies might cancel each other. use the phase
inverter to fix this.
6
FREQUENCY control knob
Cutoff frequency control knob.
Allows you to adjust the cutoff frequency of your
subwoofer depending on the connected broadband
speakers.
75Hz is exact same cutoff frequency of SR series
amplified speakers.
If using SR12A or SR15A, this value is perfect to cover
the whole audio spectrum.
SR10A speakers will require you to slightly increase the
cutoff frequency.
These settings do not affect THRU L and THRU R
outputs.
7
Fuse
Protects the power supply module of the built-in
amplifier.
If need to replace it, please make sure the new one has
the exact same characteristics.
8
Voltage selector
Allows you to adapt the voltage of your subwoofer to the
electrical outlet.
9
Power button
Before activating your subwoofer, please make sure the
LEVEL knob is positioned onto 0.
9
Power input socket
Allows you to connect your subwoofer to an
electrical outlet via the supplied IEC power cord.
Please make sure the voltage delivered by the electrical
outlet is similar to the voltage selector positioning before
activating your device.
English
Page 5