audiophony H10992 Kullanıcı Kılavuzu - Sayfa 5

Stereo sistemi audiophony H10992 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. audiophony H10992 10 sayfaları. 1200w amplified system with subwoofer and column + dsp + bluetooth

Sayfayı Yazdır

MOJO1200Line - Amplified system with subwoofer and column + DSP + Bluetooth

Power input socket and Fuse

Allows you to connect the speaker to an electrical outlet. Use the supplied IEC cord, and make sure the voltage

delivered by the outlet is in adequation with the value indicated by the voltage selector before turning on the built-in

amplifier. The fuse protects the power supply module and the built-in amplifier.

If need to replace the fuse, please make sure the new fuse has exactly the same characteristics.

2 - Power switch

3- Subwoofer sound level

Allows you to adjust the sound level of the bass.

This setting also affects the main volume level.

(PLEASE MAKE SURE TO CONFIGURE IT IN ORDER TO PREVENT THE LIMIT FROM BEING LIT).

4- Multi functions knob

Allows you to enter into each function of the DSP and make the adjustements. Please check next page for more

details.

5- Display

Show the inputs level and the differents DSP functions

6- Channels 1 and 2 input selector

Allows you to choose the type of source connected to each channel.

7- Channels sound level

Allows you to adjust the sound level of each channel.

This setting also affects the main volume level of the amplification system.

(PLEASE MAKE SURE TO CONFIGURE IT IN ORDER TO PREVENT THE LIMIT FROM BEING LIT).

8- Input connectors

CH1 and CH2 input via balanced COMBO

Connect here an XLR or JACK plug from a line level music instrument or a microphone.

CH3 input via balanced Jack

Connect here a JACK plug from a line level music instrument like guitar

CH4/5 inputs via RCA and Bluetooth

Connect a line level instrument via the RCA. The Bluetooth

9- Balanced line output

LINE LINK

output for brodcast the channel 1 and 2

MIX OUTPUT

allow you to link another system. The level is line and signal is master mixed.

Bluetooth

pairing :

With the multi functions knob (4) go to BT menu and set it to ON.

The Bluetooth

logo is blinking quickly on the display to indicate that its searching a Bluetooth

On your smartphone or computer select the "MOJO1200Line" in the list of the Bluetooth

The Bluetooth

logo is blinking slowly on the display and a sound signal indicate that your device is connected.

Please make sure to properly configure the sound levels of your system. In addition to being unpleasant for

the audience, improper settings can damage your whole sound system.

The "LIMIT" indicators will light on when the maximum level is reached and must never be permanently lit.

CAUTION

Beyond this maximul level, the volume will not increase but will be distorted.

Moreover, your system can be destroyed by an excessive sound level despite of the internal electronic protections.

First, in order to prevent that, adjust the sound level via the Level of each channel.

Then, use the High/Low equalizer to adjust the acoustic as you wish and then the Master level.

If the sound output does not seem powerful enough, we strongly recommend to multiply the number of systems in

order to spread the sound output evenly.

(Mic 40k Ohms / Line 10k Ohms)

(Line 20k Ohms)

receiver is also on this channel.

English

connexion.

devices to connect it.

Page 5