Consonance ORFEO Kullanıcı Kılavuzu - Sayfa 5

CD Çalar Consonance ORFEO için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Consonance ORFEO 7 sayfaları.

From left to right the connectors are :

AC Power connection 240V / 230V / 220V / 115V / 100V AC dependent on country.

Digital output Phono/RCA ,No.10

Unbalanced outputs Phono/RCA right/left

We recommend to connect signal cables to the CD-player when the CD-player and all the other units of the audio

system is switched off.

The CD-player has two types of analog audio outputs: unbalanced audio signal with RCA plugs (phono plugs)

The CD-player has got one RCA standard SPDIF digital audio output. Digital signal level is 0.5Vpp when

terminated in 75 ohm load. This is the standard load impedance of external DAC's and other recording equipment.

USE & PLACEMENT

The Consonance ORFEO should be placed on a flat, hard surface for proper isolation against vibrations. The CD-

player performs best after being switched on for about 30 minutes for heating upage A certain space is required

for air circulation above and below the CD-player. The CD-player must never be placed on a carpet or similar

surface that obstructs air circulation through the component. Nor must it be covered while in use or placed on a

narrow shelf or in another confined space.

The top cover are made of cherry wood, while the front panel and side panels are made of brushed / blasted and

anodized aluminum. Fingerprints or stains on the front panel, knobs or top cover can be removed with a cloth

moistened with warm water.

We wish you good luck in setting up and connecting your new CD-player and hope that it will give you many years

of joyful natural sounding music experiences!