Audiopipe TS-VR8 Kullanıcı Kılavuzu - Sayfa 5

Subwoofer Audiopipe TS-VR8 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Audiopipe TS-VR8 8 sayfaları.

Primary advantages: Small, good low frequency extension and control, simple to build.

This type of enclosures is a classic design and the easiest to build among most installers.

These enclosure recommendations have been calculated with the airspace inside and include

the displacement of the woofer. All sealed enclosure designs should be filled to 50% with

loose poly-fil stuffing. The use of poly-fil will slightly decrease efficiency but will deepen

and extend the low frequency output.

Subwoofer

TS-V6

TS-VR8

TS-VR10

TS-VR12

TS-VR15

Use 3⁄4" or thicker MDF (medium density fiberboard) and seal the joints with silicone.

All the cubic ft measurements in this manual include the displacement of the woofer

and port. All ports have been calculated using rectangular ports it would be impractical

to use round ports for these designs. Do not install ports opening against a solid surface,

such as an internal brace, back panel or seat of your vehicle. The port opening must

remain unobstructed.

Recommended Sealed Enclosure

Volume

(net int.)

0.25 FT

0.5 FT

1.0 FT

1.75 FT

2.25 FT

-3-

External Dimensions

(Width x Height x Depth)

?" x ?" x ?"

10" x 10" x 11"

12" x 12" x 13"

14" x 14" x 16"

16" x 16" x 18"