Dante DLF1102 Kurulum ve Kullanım Kılavuzu - Sayfa 5
Dijital Kamera Dante DLF1102 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Dante DLF1102 10 sayfaları. 1/4" 23x optical, 10x digital zoom 540tvl integrated camera
Sayfayı Yazdır
Operating Your Camera
Operating Your Camera
Menu setup
Up button
SET button
Left button
Down button
Right button
1.Press the SET button to access the main setup mode.
Main setup menu is displayed on the monitor screen.
CAM TITLE
WHIET BA
BACKLIGHT
MOTION DET
FOCUS
EXPOSURE
SPECIAL
RESET
EXIT
2.Select the desired feature using the UP or DOWN button.
Each
pressing
of the UP or
the next or previous feature.
Move the arrow indicator to the desired feature item.
3.Change the status of the selected feature using the left or right
button.
4.When completed, move the arrow indicator to
the SET
button.
Operating Your Camera
Operating Your Camera
3.Press SET button
A
B C D E F G H I J K L M
O P Q R S T U V W X Y Z
c d e f g h I j k l m n o
q r s u v w x y z 0 1 2 3
4
5 6 7 8 9 ( ) < > / # ! ?
Elminate
4.You can enter up to 20
characters
Move the cursor to the character entry field using the LEFT or
RIGHT button.
Use UP, DOWN, LEFT and RIGHT buttons to select a desired character.
A
B
O
P
c
d
q
r s
4
5 6
Elminate
Press the
SET
button to confirm selection of the blinking
character. The character is then saved, and the cursor in the
entry field moves to the next position.
Repeat steps1 through 3 until the desired name has been
entered.
Note
Correcting Mistakes
Move the cursor to CLR and press the SET button to clear the entire entry.
To modify one character, use or-to position the cursor above the character
To be modified and click the SET button after selecting the character to enter.
POWER
TELE
VIDEO OUT
F-NEAR
SET
F-FAR
WIDE
COMM
DC 12V IN
MAIN SETUP
OFF
ATW
OFF
OFF
DOWN
button
moves
the
indicator to
exit and press
8
CAM TITLE
N
a
b
p
t
Position
Exit
CAM TITLE
C D
E F
G H I
J
K L
M
N
Q R
S T
U V
W X
Y Z
a
b
e f g
h I
j
k l
m n
p
o
u
v
t
w x
y z
0 1
2 3
7
8 9
( )
< >
/ #
! ?
Position
Exit
10
Operating Your Camera
Operating Your Camera
Select feature using the UP
CAM TITLE
or DOWN button
WHIET BA
BACKLIGHT
MOTION DET
FOCUS
EXPOSURE
SPECIAL
RESET
EXIT
Note:
Features marked with a have an accessible submenu.
Access the submenu by pressing the SET button.
CAM TITLE
Use the feature to designate a name for the camera, which will
display on the monitor screen.
1.Press the SET button to display the main setup menu and move
the arrow indicator to
CAM TITLE
2.Set
CAM TITLE
to
ON
Note:
If the CAM TITLE feature is set to
OFF , the name will not display
in the monitor.
Operating Your Camera
Operating Your Camera
5.Select on screen position of the cam title.
Move the cursor to POS and press SET button.
The CAM TITLE is displayed on the top-left of the monitor screen.
(default position).
Select the position by using the 4-directional buttons, then
press the SET button to confirm the position.
6.When completed, move the cursor to
White balance control
The camera provides three
choosing in adjusting the white balance.
1).Press the SET button to access
the main setup menu and move
the indicator to
WHITE BAL
using the UP or DOWN button.
2). Set
WHITE BAL
using the
LEFT or RIGHT button.
* The three white balance control modes are as follows:
ATW (Auto tracking white balance):
Outdoor: this mode can be used within the color temperature
range 1800-10500K.
( Ex: fluorescent light, outdoor, sodium vapor lamp or inside tunnels)
Indoor: this mode can be used within the color temperature range
3000K-10500K.
AWC (Auto white balance control):
The white balance is automatically adjusted in a specific environment.
In order to obtain the best res ult, press the SET button while the
camera focuses on white paper, if the environment including the
light source is changed, you have to adjust the white balance again.
MAIN SETUP
-----------Change the status using
OFF
ATW
the LEFT or RIGHT button
OFF
OFF
using the UP or DOWN button.
using the LEFT or RIGHT button.
MAIN SETUP
CAM TITLE
OFF
WHIET BA
ATW
BACKLIGHT
OFF
MOTION DET
OFF
FOCUS
EXPOSURE
SPECIAL
RESET
EXIT
9
END
and press SET button.
WHITE BAL
control modes for your
MAIN SETUP
CAM TITLE
OFF
WHIET BA
ATW
BACKLIGHT
OFF
MOTION DET
OFF
FOCUS
EXPOSURE
SPECIAL
11