Beldray BODEN Kullanım Kılavuzu - Sayfa 6

Soba Beldray BODEN için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Beldray BODEN 9 sayfaları. 1800w

Replace the bulbs with a 25W G9 halogen bulb.

Take care not to touch the bulbs with bare hands.

Remove the defective bulb by pulling it out of the holder.

To reassemble, follow the above instructions in reverse order.

The bulbs in this stove are 220-240V ~ 50Hz G9 halogen bulbs.

Due to the indeterminate life span and the ease of replacement, the bulbs are specifically

excluded from the guarantee.

Care and Maintenance

Before attempting any cleaning or maintenance, always unplug the stove from the mains power supply.

Ensure that the stove has cooled fully.

The glass parts can be wiped clean with a soft, dry cloth; do not use polishes or abrasive materials.

The exterior of the stove should be cleaned with a soft, damp, lint-free cloth and dried thoroughly.

Do not immerse the stove in water or any other liquid.

Do not use harsh or abrasive cleaning agents to clean the stove.

Problem

No light from the fuel effect.

No heat or light.

Light but no heat.

Power supply: 220-240V ~ 50Hz

Power Consumption: 1800W

Bulb: 2 x 25W G9 halogen bulb

THE SCIENCE

BEHIND HEAT

Cause/Solution

This may indicate a bulb failure. Remove

the faulty bulb as detailed in the 'Bulb

Replacement' section and check it in a

working lamp.

Check the mains power supply by plugging

in a working appliance. If the mains power

supply is functional and the cord or plug of

the stove is suspected to be faulty, have it

checked by an electrician.

Check that the thermostat on the stove is

set above the current room temperature.

Alternatively, the automatic safety cut-off

may have engaged; see the 'Automatic Safety

Cut-Off' section.

EH0792WK 1800W Boden Electric Stove