3xLogic VX-2V-MD-RIWH Hızlı Başlangıç Kılavuzu - Sayfa 18
Güvenlik Kamerası 3xLogic VX-2V-MD-RIWH için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. 3xLogic VX-2V-MD-RIWH 20 sayfaları. Visix v-series all-in-one camera gen ii
Sayfayı Yazdır
Quick Start - Remote Monitoring and Viewing - Adding a V-Series Camera to VIGIL
Client
Steps:
To interface a V-Series Camera with VIGIL Client:
1.
Launch VIGIL Client (Local Mode only; VCM mode will only display Servers from a networked VCM Server)
and select Servers from the Servers top menu. This will launch the Servers window. VISIX V-Series
devices are considered edge recording devices and thus are recognized as their own VIGIL Server within
the VIGIL suite.
2.
Click Add. This will deploy the Add/Edit VIGIL Server window.
3.
Enable the Use VIGIL Connect option. If connecting using traditional network connection criteria is
desired, enter the cameras IP Address/DNS Name and confirm TCP/IP port status.
4.
Enter in the VIGIL Connect alias of the desired V-Series Camera (VIGILTest1 used in the below example).
Skip this step if using traditional network connection criteria (IP/Port).
5.
Click Test VIGIL Connect to confirm the camera can be communicated with through the Connect system
using the provided alias. Skip this step if using traditional network connection criteria (IP/Port).
6.
If the test is successful, then VIGIL Client can successfully communicate with the Server. Click OK at the
bottom of the Add Server window after configuring all required fields to save the new Server to VIGIL
Client. For more information on configuring VIGIL Servers, please see Section 5.1 of the VIGIL Client
Users Guide.
NOTE: The camera will be visible in the Client treeview and will be represented by a
camera video stream can be added to the VIGIL Client viewer in the same manner as VIGIL Server
cameras; Simply extend the camera's drop-down menu and double click the icon to add it to the
viewer. Alternatively, a user can drag-and-drop the camera stream icon into the desired frame of
the VIGIL Client viewer.
For more information on configuring VIGIL Servers/V-Series All-in-One camera in VIGIL Client, please see
Section 5.1 of the VIGIL Client Users Guide
12000 Pecos St., Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
V-Series Camera Quick Start Guide | VX-2V-MD-RIWH
Adding V-Series Camera to VIGIL Client
icon. The
18