Aeware in.k600 Manuel - Sayfa 15

Uzaktan Kumanda Aeware in.k600 için çevrimiçi göz atın veya pdf Manuel indirin. Aeware in.k600 20 sayfaları. Techbook

Sayfayı Yazdır
Aeware in.k600 Manuel
in.k600™
Setting the time
Enter.Programming.mode.by.
holding.Prog..key.pressed.
down.for.3.sec..The.display.will.
show.the.current.time.setting.
Setting the hour:
+
-
Use.(
) or.(
).key.to.change.hour.
setting.(AM/PM).
Setting the minutes:
Press.Prog..key.a.second.time.
+
-
Use.(
) or.(
).key.to.change..
hour.setting.
Setting filter cycle start time
To.program.the.filter.cycle,.you.
must.enter.these.parameters:.
the.start.time,.duration.and.
frequency..During.a.filter.
cycle,.pumps.run.for.one.min-
ute.to.purge.the.plumbing,.
then.Pump.1.runs.for.the.
programmed.number.of.hours.
Press.Prog..key.a.third.time.
FSxx
The.display.will.show.
,.
with."xx".representing.the.
starting.hour.
+
-
Use.(
) or.(
).key.to.change.
setting.(0:00.h.-.23:00h).
Setting filter cycle duration
Press.Prog..key.a.fourth.time.
Fdxx
The.display.will.show.
,.
with."xx".representing.the.
duration.in.hours.
+
-
Use.(
) or.(
).key.to.change.
setting..
functions
Filter cycle frequency
Press.Prog..key.a.fifth.time.
The.display.will.show.FFxx,.with.
"xx".representing.the.number.of.
filter.cycles.per.day.(up.to.4).
+
-
Use.(
) or.(
).key.to.change.
setting.
15