Constellation Argo Kullanıcı El Kitabı - Sayfa 14

Amplifikatör Constellation Argo için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Constellation Argo 20 sayfaları.

22. Input

Press this button to select among the Argo's XLR and RCA inputs. You will have to wait a second or so between

pushes of this button, because for best sound quality the Argo uses relays to switch inputs.

23. Phase

Push this to flip the phase of the Argo's output signal for the selected input. Use whichever setting sounds

best.

Control screens

Many Argo functions are controlled through the LCD touchscreen. Here is how the control screens function:

Standby screen

This screen appears if you touch the touchscreen when the

rear-panel master power switch is flipped up. Pushing the

onscreen Power button (or the Standby button on the

remote) will power up the Argo and put it into warmup

mode.

Powering on screen

This screen appears after you press the onscreen Power

button or the Standby button on the remote while the Argo

is powered down. It indicates that the Argo is in warmup

mode. No buttons will function when this screen appears.

After about 10 seconds, the Argo will become active and an

input screen will appear.

Powering off screen

This screen appears for about 10 seconds if you push the

Standby button under the middle of the front touchscreen

or on the remote while the Argo is powered on. It indicates

that the Argo is powering off and going into Standby mode.

No buttons will function when the screen appears.